定压注水技术可行性探讨

详细信息    查看官网全文

• 英文论文题名：Feasibility discussion on water injection technology with constant pressure
• 论文作者：徐国民
• 英文论文作者：Xu Guomin
• 年：2017
• 作者机构：大庆油田有限责任公司第四采油厂;
• 论文关键词：定压注水 ; 定压配水 ; 定压配水器 ; 定压配水思路 ; 定量注水
• 英文论文关键词：water injection with constant pressure ; water distribution with constant pressure ; water injector with constant pressure ; scheme for water distribution with constant pressure ; quantitative water injection
• 会议召开时间：2017-03-01
• 会议录名称：《采油工程文集》2017年第1辑
• 英文会议录名称：Oil Production Engineering
• 语种：中文
• 分类号：TE357.6
• 学会代码：DQGY
• 学会名称：大庆油田有限责任公司采油工程研究院
• 页数：4
• 文件大小：636k
• 原文格式：D

摘要

从注水的根本目的出发,介绍了注水方案的编制原则及注水关键,分析了目前分层定量注水存在的问题,探讨了分层定压注水思路、定压注水优势、定压注水需要解决的关键技术等。探讨结果表明,将定压分层注水技术的注水目的和注水手段统一,便于操作且注水效率高,注水质量好且合格率高;所以探索研究分层定压注水技术具有重要工业价值,为分层定压注水技术实现奠定了理论基础。
In order to enlarge the sweep volume, reduce the imaginary water injection, the water injection technology with constant pressure has been studied. Starting from the fundamental purpose of water injection, the principle of water injection scheme and key points were introduced, and the problems existed in the separate layer quantitative water injection were analyzed currently. The paper discusses the scheme, advantages and the key technologies need to be solved for the separate layer water injection technology with constant pressure. Discussion results showed that the unified purpose and means for separate layer water injection with constant pressure could make the injection operation easier with high efficiency,good quality and high qualified rate. Therefore, research on the separate layer water injection technology with constant pressure has important commercial value, which will lay a theoretical foundation for realizing the separate layer water injection technology with constant pressure.

引文

[1]赵永胜,陆蔚刚,兰玉波,等.多层砂岩油田水驱开发的合理注水压力[J].大庆石油地质与开发,2000,19(6):21-26.
    [2]Rod P Batycky,Marco Thiele,Richard Oren Bake,et al.Revisiting Reservoir flood-surveillance methods using streamlines[J].SPE Reservoir Evaluation&Engineering,SPE 95402,2008,11(2):387-393.
    [3]王建华,孙栋,李和义,等.精细分层注水技术研究与应用[J].油气井测试,2011,20(4):41-44.
    [4]Kelly T R.Utilizing compositional simulation for material balance and bottomhole pressure calculations in CO2WAG floods[C].Society of Petroleum Engineers,SPE99714,2006:1-12.
    [5]Zhouyuan Zhu,Marco Thiele,Margot Geertrui Gerritsen.Thermal Streamline simulation:Steam floods[C].Society of Petroleum Engineers,SPE 139501,2011:1-13.
    [6]刘合,裴晓含,罗凯,等.中国油气田开发分层注水工艺技术现状与发展趋势[J].石油勘探与开发,2013,40(6):733-737.
    [7]Abdullah F.Modeling the oil bank formation during steam flood[C].Society of Petroleum Engineers,SPE142618,2011:1-7.
    [8]于常胜.浅谈油田注水井的精细管理[J].中国科技博览,2014(7):349.
    [9]Brattekas B.New insight into wormhole formation in polymer gel during water chase floods with positron emission tomography[C].Society of Petroleum Engineers,SPE180051,2016:1-8.
    [10]陈涛平.石油工程[M].北京:石油工业出版社,2011:375-376.
    [11]宣言.精细分层注水工艺技术试验研究[D].大庆:东北石油大学,2012.
    [12]翟云芳.渗流力学[M].北京:石油工业出版社,2009:16-19.