用户名: 密码: 验证码:
某包装箱运输隔振系统性能仿真及参数选择
详细信息    查看官网全文
摘要
本文针对某包装箱的空气弹簧隔振系统设计要求,根据系统的构造特点建立了三自由度动力学模型。分别在单一正弦激励和真实车底板激励工况下进行动力学响应的仿真,并对比了不同参数条件下的隔振效率。结果表明:隔振器采用空气弹簧可获得较好的隔振效果,且隔振器参数对质心横向偏转位移的影响较小。研究结果可为隔振系统初期设计提供参考依据。
Based on the designing of air spring vibration isolation system for a certain packing case, a three-degrees of freedom vibration isolation system dynamics model is built. Through a dynamics simulation of response which is under the excitation of single-sine and real road, vibration isolation efficiency under different parameters is calculated. The result of the simulation shows that the parameters of vibration isolators cause tiny impact on centroid deflection. The result of researching provides a reference for vibration isolation system designing during its early age.
引文
[1].郝慧荣,白鸿柏,张慧杰,李冬伟,刘树峰.六自由度主被动一体隔振平台的动力学实验建模[J].振动与冲击,2011(30):4-7.
    [2].赵强,李洪人.六自由度运动平台的振动分析与测试[J].机械强度,2006(1):17-21.
    [3].丁文镜.减振理论[M].北京:清华大学出版社.2014.
    [4].刘献栋,邓志党,高峰.基于逆变换的路面不平度仿真研究[J].中国公路学报2005(1):126-130.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700