定向凝固U720Li合金的高温塑性变形行为

详细信息    查看官网全文

• 英文论文题名：Plastic Deformation Behavior of Directionally Solidified U720Li Alloy at Elevated Temperature
• 论文作者：高博 ; 王磊 ; 梁涛沙 ; 刘杨 ; 宋秀 ; 曲敬龙
• 英文论文作者：Gao Bo ; Wang Lei ; Liang Taosha ; Liu Yang ; Song Xiu ; Qu Jinglong ; Key Laboratory for Anisotropy and Texture of Materials ; Ministry of Education ; Northeastern University ; High Temperature Materials Research Division ; Central Iron and Steel Research Institute
• 年：2015
• 作者机构：东北大学材料各向异性与织构教育部重点实验室;钢铁研究总院高温材料研究所;
• 论文关键词：定向凝固 ; U720Li合金 ; 热加工塑性 ; 动态再结晶
• 英文论文关键词：directional solidification ; U720Li alloy ; hot-working plasticity ; dynamic recrystallization
• 会议召开时间：2015-05-20
• 会议录名称：第十三届中国高温合金年会论文集
• 英文会议录名称：Proceedings of the 13th China Superalloys Conference
• 语种：中文
• 分类号：TG132.3
• 学会代码：ZGJS
• 会议名称：第十三届中国高温合金年会
• 会议地点：中国北京
• 主办单位：中国金属学会高温材料分会
• 学会名称：中国金属学会
• 页数：1
• 文件大小：62k
• 原文格式：O
• 会议级别：全国

摘要

采用热模拟实验研究了定向凝固与等轴晶U720Li合金的高温塑性变形行为,利用OM,SEM和EBSD分析了不同变形条件下合金的组织特征及动态再结晶机制。结果表明,定向凝固与等轴晶合金的变形抗力均随变形温度升高而降低。定向凝固U720Li合金沿垂直柱状晶方向变形时变形抗力较低,枝晶间协调变形能力良好,未出现裂纹。与等轴晶合金相比,相同变形条件下定向凝固合金的动态再结晶组织均匀;高温塑性变形过程中,定向凝固合金的动态再结晶主要以晶界弓弯和位错塞积方式形核。定向凝固U720Li合金的变形激活能为766kJ/mol,比等轴晶合金降低了38.6%,定向凝固合金呈现出更好的热加工特性。
U720Li,a kind of precipitation type nickel-based superalloy,shows excellent mechanical properties at elevated temperature,which is also known as the difficult-to-deform alloy because of the high-alloying.To solve its deformation problem,new methods would be developed to enlarge the temperature deforming window and improve its plasticity.The results show that the deforming resistances of both directionally solidified and equiaxed grain U720 Li alloys decrease with the increasing of deforming temperature.When the angle 9 between the compression deforming direction and dendrite growth direction is 90°,the deforming resistance of directionally solidified U720 Li alloy would be lower.With this direction,the coordination deformation between the dendrites becomes better and no crack can be found after deformation,which indicates that the deforming ability is best along B =90°.Compared with equiaxed grain alloy,directionally solidified U720 Li alloy performs higher deformation ability and more homogenous microstructures.During the deformation of directionally solidified U720 Li alloy,bulging nucleation of grain boundary migration and dislocation pile-up induced nucleation are found as the main mechanism for the nucleation of dynamic recrystallization.In addition,the deformation activation energy of directionally solidified U720 Li alloy is 766kJ/mol,which is 482kJ/mol lower than that of equiaxed grain alloy,indicating the directional solidified U720 Li alloy exhibits better hot-working plasticity.

引文