医药产业园区废水提标处理中试工艺参数优化

详细信息    查看全文 | 推荐本文 |

英文篇名：Optimization of Pilot Scale Process Parameters for Advanced Treatment of Wastewater in Pharmaceutical Industrial Park 作者：张健君 ; 陈立春 ; 吴春雷 ; 杨淑芳 ; 林玉鹏 ; 邓莹 ; 黄重庆 英文作者：ZHANG Jian-jun;CHEN Li-chun;WU Chun-lei;YANG Shu-fang;LIN Yu-peng;DENG Ying;HUANG Chong-qing;Shenzhen Municipal Design & Research Institute Co.Ltd.;Shenzhen Management Office for Preliminary Work of Government-invested Projects; 关键词：医药废水 ; 提标处理 ; 强化除磷脱氮 ; 工艺参数优化 英文关键词：pharmaceutical wastewater;;advanced treatment;;enhanced phosphorus removal and denitrification;;optimization of process parameter 中文刊名：GSPS 英文刊名：China Water & Wastewater 机构：深圳市市政设计研究院有限公司;深圳市坪山区政府投资项目前期工作管理办公室; 出版日期：2019-03-01 出版单位：中国给水排水 年：2019 期：v.35;No.481 语种：中文; 页：GSPS201905020 页数：5 CN：05 ISSN：12-1073/TU 分类号：94-98

摘要

在深圳国家生物医药产业基地园区内,针对典型医药废水的提标处理,以强化除磷脱氮生化系统为核心,采用臭氧氧化+生物活性炭组合工艺处理该类废水可获得较好的效果。通过中试对工艺参数进行优化后,可使出水水质稳定达到《地表水环境质量标准》(GB 3838—2002)中的Ⅳ类水标准(TN≤5 mg/L)。
        A combination process of ozone oxidation and biological activated carbon was used to treat typical pharmaceutical wastewater in Shenzhen National Bio-pharmaceutical Industry Base. Good wastewater treatment effect was achieved,which was mainly ascribed to enhanced phosphorus removal and denitrification biochemical system. The quality of effluent could stably meet the requirement of classⅣ standard (TN≤5 mg/L) in Environmental Quality Standards for Surface Water (GB 3838-2002)after the parameters of pilot scale process were optimized.

引文

[1]戴启洲,蔡少卿,王家德,等.臭氧/生物法处理制药废水[J].中国给水排水,2010,26(10):122-125.Dai Qizhou,Cai Shaoqing,Wang Jiade,et al.Ozone/biological technology for pharmaceutical wastewater treatment[J].China Water&Wastewater,2010,26(10):122-125(in Chinese).
    [2]Chang C Y,Chang J S,Vigneswaran S,et al.Pharmaceutical wastewater treatment by membrane bioreactor process-a case study in southern Taiwan[J].Desalination,2008,234:393-401.
    [3]Zhang Y,Xie J P,Liu M M,et al.Microbial community functional structure in response to antibiotics in pharmaceutical wastewater treatment systems[J].Water Res,2013,47(16):6298-6308.
    [4]李亚峰,高颖.制药废水处理技术研究进展[J].水处理技术,2014,40(5):1-4.Li Yafeng,Gao Ying.Research progress in the treatment technologies of pharmaceutical wastewater[J].Technology of Water Treatment,2014,40(5):1-4(in Chinese).
    [5]庞艳,冀强,勾怀亮,等.二级UASB厌氧工艺在制药废水中的应用[J].环境工程,2005,23(4):25-27.Pang Yan,Ji Qiang,Gou Huailiang,et al.Application of anaerobic process of two-stage upflow anaerobic sludge bed in pharmaceutical wastewater[J].Environmental Engineering,2005,23(4):25-27(in Chinese).
    [6]郭永福,郭维华.DIC厌氧反应器在医药废水处理中的应用[J].环境工程学报,2008,2(10):1373-1377.Guo Yongfu,Guo Weihua.Application of DIC anaerobic reactor in treatment of pharmacy wastewater[J].Chinese Journal of Environmental Engineering,2008,2(10):1373-1377(in Chinese).
    [7]李亚峰,王欣,谢新立.预处理-UASB-A/O工艺处理高浓度制药废水[J].给水排水,2012,38(5):56-57.Li Yafeng,Wang Xin,Xie Xinli.Pretreatment-UASB-A/O process to treat high concentration pharmacy wastewater[J].Water&Wastewater Engineering,2012,38(5):56-57(in Chinese).
    [8]许彦春,许璐,佟晶杰,等.预曝气/厌氧/缺氧/好氧工艺处理制药废水[J].中国给水排水,2015,31(2):94-97.Xu Yanchun,Xu Lu,Tong Jingjie,et al.Pre-aeration/anaerobic/anoxic/aerobic process for pharmaceutical wastewater treatment[J].China Water&Wastewater,2015,31(2):94-97(in Chinese).
    [9]冯津津,李晓红,曾萍,等.采用水解酸化-复合好氧处理制药工业废水的工艺评价[J].环境工程学报,2015,9(3):1043-1048.Feng Jinjin,Li Xiaohong,Zeng Ping,et al.Evaluation of pharmaceutical industrial wastewater treatment by composite hydrolyze acidification-composite aerobic process[J].Chinese Journal of Environmental Engineering,2015,9(3):1043-1048(in Chinese).