天然金刚石的锯切表面分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Sawed surface analysis of natural diamond 作者：石广丰 ; 付旺 ; 王淑坤 ; 韩冬冬 ; 张华 ; 刘思宇 英文作者：SHI Guangfeng;FU Wang;WANG Shukun;HAN Dongdong;ZHANG Hua;LIU Siyu;College of Mechanical and Electrical Engineering, Changchun University of Science and Technology; 关键词：天然金刚石 ; 切割 ; 粗糙度 ; 晶体物相 英文关键词：natural diamond;;cutting;;roughness;;crystal phase 中文刊名：JGSM 英文刊名：Diamond & Abrasives Engineering 机构：长春理工大学机电工程学院; 出版日期：2019-04-20 出版单位：金刚石与磨料磨具工程 年：2019 期：v.39;No.230 基金：吉林省科技厅计划项目(20190302123GX,No20180414068GH,No.20170101124JC);; 国家自然科学基金资助项目(No.51575057) 语种：中文; 页：JGSM201902003 页数：4 CN：02 ISSN：41-1243/TG 分类号：17-20

摘要

锯切金刚石是加工精度较高的一种切割方式。利用钻石切割机对天然金刚石进行切割后,通过光学显微镜、粗糙度测量仪、X射线衍射仪等对锯切金刚石的切割面进行检测分析,获得天然金刚石(100)晶面的表面形貌、粗糙度、物相等。结果表明:刀痕是影响天然金刚石锯切表面加工质量的主要因素,切割后的表面都会生成碳的非石墨相同素异形体,刀痕表面碳的同素异形体含量为8.3%,光滑表面为2.0%。采用正常的锯切方式,可以得到良好的天然金刚石切割表面。
        Sawing diamond is a cutting method with high processing precision. Diamond cutting machine is used to cut natural diamond, and then the sawing diamond cutting surface is detected and analyzed by optical microscope, roughness measuring instrument and X-ray diffractometer. The surface morphology, roughness and crystal image of natural diamond(100) crystal surface are obtained. The results show that tool trace is the main factor affecting the quality of natural diamond sawing surface processing. It is also found that isomerization of carbon occurs on the surface after cutting and generates a non-graphitizing carbon allotrope, whose content on the surface of the tool trace is 8.3% but 2.0% on smooth surface. Good natural diamond cutting surface can be obtained by normal sawing method.

引文

[1] 石广丰,朱可可,张云飞,等.天然金刚石的水射流引导激光切割及检测分析 [J].制造业自动化,2017,39(6):74–76.SHI Guangfeng,ZHU Keke,ZHANG Yunfei,et al.Water jet guided by natural diamond to laser cutting and detection analysis [J].Manufacturing Automation,2017,39(6):74-76.
    [2] 谈耀麟.单晶金刚石工具 [J].珠宝科技,2002,14(2):61–64.TAN Yaolin.Mono crystal diamond tools [J].Jewelry Technology,2002,14(2):61-64.
    [3] COE S E,SUSSMANN R S.Optical,thermal and mechanical properties of CVD diamond [J].Diamond and Related Materials,2000,9(9-10):1726-1729.
    [4] NEBEL C E.Electronic properties of CVD diamond [J].Semiconductor Science & Technology,2003,18(18):S1.
    [5] GRUEN D M,SHENDEROVA O A,VUL A Y.Synthesis,properties and applications of ultrananocrystalline diamond [J].Synthesis,2005,192(21):373-382.
    [6] 龚学清,穆守.金刚石激光定向切割取得重大突破 [J].应用激光,1983(4):26.GONG Xueqing,MU Shou.Diamond laser directional cutting made a major breakthrough [J].Application Laser,1983(4):26.
    [7] 石广丰,韩冬冬,朱可可.激光与水射流引导激光切割天然金刚石对比分析 [J].制造业自动化,2017,40(2):57–59.SHI Guangfeng,HAN Dongdong,ZHU Keke.Comparative analysis of laser and water jet guided laser cutting natural diamond [J].Manufacturing Automation,2017,40(2):57-59.
    [8] 张著军.天然金刚石刀具的激光切割技术研究 [D].哈尔滨:哈尔滨工业大学,2014.ZHANG Zhujun.Research on laser cutting technology of natural diamond tools [D].Harbin:Harbin Institute of Technology,2014.
    [9] 史双佶.金刚石摩擦化学抛光用抛光盘制备及抛光机理研究 [D].大连:大连理工大学,2016.SHI Shuangji.Study on preparation and polishing mechanism of polishing disc for diamond friction chemical polishing [D].Dalian:Dalian University of Technology,2016.
    [10] 王洪祥,郭健,王健,等.KDP晶体各向异性对切削力的影响研究 [J].工具技术,2008,42(6):3–5.WANG Hongxiang,GUO Jian,WANG Jian,et al.Study on the influence of KDP crystal anisotropy on cutting force [J].Tool Technology,2008,42(6):3-5.