两亲聚合物泡沫在多孔介质中的渗流及分流特性

详细信息    查看全文 | 推荐本文 |

英文篇名：Percolation Mechanism and Distributary Rules of Amphiphilic Polymer Foam in Porous Media 作者：张瑞香 ; 王杰 ; 高军 英文作者：ZHANG Ruixiang;WANG Jie;GAO Jun;Institute of Oil and Gas Engineering,Shengli College,China University of Petroleum;Technology Inspection Center of Shengli Oilfield;Metrology Monitoring Station of Zhongyuan Oilfield Technology Monitoring Center; 关键词：两亲聚合物泡沫 ; 多孔介质 ; 阻力因子 ; 封堵性能 英文关键词：amphiphilic polymer foam;;porous media;;resistance factor;;block performance 中文刊名：SYSY 英文刊名：Research and Exploration in Laboratory 机构：中国石油大学胜利学院油气工程学院;中石化胜利油田技术检测中心;中石化中原油田技术监测中心计量监测站; 出版日期：2019-04-15 出版单位：实验室研究与探索 年：2019 期：v.38;No.278 基金：国家自然科学基金项目(20873181);; 中国石油大学胜利学院项目(KY2017024) 语种：中文; 页：SYSY201904007 页数：5 CN：04 ISSN：31-1707/T 分类号：25-28+54

摘要

为了研究两亲聚合物泡沫在地层中封堵大孔道的能力及驱油性能,利用填砂管模型模拟地层环境,通过改变两亲聚合泡沫的气液比、注入速度等条件,探讨了两亲聚合泡沫的渗流特性。结果表明:两亲聚合物泡沫在多孔介质中的阻力因子随着气液比的增加先增大后减小,最佳气液比在1∶1到2∶1,此时两亲聚合物泡沫的封堵能力最强。两亲聚合物泡沫在多孔介质中的阻力因子随渗透率和注入速度的增加而变大;原油存在和温度升高时两亲聚合物泡沫在多孔介质中的渗流阻力变小;两亲聚合物泡沫可以有效封堵储层中的高渗透层,减小高、低渗透层的渗透率差异,从而使注入流体在不同渗透率层内比较均匀地推进,且对不同渗透率级差的岩心具有良好的适应性。
        In order to study the ability of amphiphilic polymer foam in blocking large pores in the layer and oil displacement performance,a sand-filled tube model was used to simulate the stratigraphic environment,and the seepage characteristics of polymeric foam,such as the gas-liquid ratio and the injection speed of the amphiphilic polymerization foam,etc. were explored by changing the conditions. The results showed that the increases of gas-liquid ratio,the resistance factor of the amphiphilic polymer foam in porous media increases at beginning and then decreases,and an optimal gas-liquid ratio exists and at this time the plugging of the amphiphilic polymer foam reaches the best value. The optimal gas-liquid ratio is between 1∶ 1 and 2∶ 1. The resistance factor of the amphiphilic polymer foam becames larger when the injecting velocity or the permeability increases. Crude oil and high temperature could make the resistance factor of the amphiphilic polymer foam decrease. The amphiphilic polymer foam could effectively block the high permeability layer in the reservoir,and could adjust the permeability differences between high permeability layer and low permeability layer in order to ensure the uniform migration of the injection fluid in the different permeability levels and it had a good adaptability in the cores of different permeability ratios.

引文

[1]康万利,王杰,吴晓燕,等.两亲聚合物泡沫稳定性及影响因素研究[J].油田化学,2012,29(1):48-51.
    [2]赵巍.聚合物泡沫在多孔介质中的非稳态流动[D].大庆:东北石油大学石油工程学院,2015.
    [3]孙建峰,郭东红,崔晓东,等.甜菜碱类低界面张力泡沫驱油体系性能研究[J].石油钻采工艺,2014,36(3):92-96.
    [4]袁新强,李洁,王克亮.低张力体系与泡沫交替注入驱油效果[J].大庆石油地质与开发,2012,31(2):141-145.
    [5]王波,王鑫,刘向斌,等.高含水后期厚油层注氮气泡沫控水增油技术研究[J].大庆石油地质与开发,2006,25(2):59-60.
    [6]杜东兴,王德玺,贾宁洪,等.多孔介质内CO2泡沫流渗流特性实验研究[J].石油勘探与开发,2016,43(3):456-462.
    [7]苏燕,赵勇胜,李璐璐,等.多孔介质中泡沫的迁移特性和影响因素研究[J].中国环境科学,2015,35(3):817-824.
    [8]李雪松.无碱低张力泡沫复合驱油体系室内试验研究[J].石油天然气学报,2009,31(2):130-134.
    [9]苏燕,张文静,梁秀春,等.泡沫强化多孔介质中纳米零价铁迁移试验[J].中国化境科学,2015,35(6):1700-1708.
    [10] Raza S H. Foam in porous media:Characteristics and potential applications[J]. Soc Pet Eng,1790,56:328-336.
    [11]张星,赵金省,张明,等.氮气泡沫在多孔介质中的封堵特性及其影响因素研究[J].石油与天然气化工,2009,38(3):227-230.
    [12]栾春芳.空气泡沫驱油技术在低渗透油藏中的应用研究[J].石油化工高等学校学报,2015,28(3):51-55.
    [13]康宵瑜,王维波,汤瑞佳,等.空气泡沫驱油技术在低温特低渗油藏中的应用—以甘谷驿油田唐80井区为例[J].非常规油气,2016(3):68-74.
    [14]吴忠正,李华斌,郭程飞,等.渗透率级差对空气泡沫驱油效果的影响[J].油田化学,2015(1):83-87,107.
    [15]王双阳,尹洪军,尹超,等.低渗透油藏聚合物强化泡沫调剖剂[J].数学得实践与认识,2014,44(23):110-114.
    [16]于清艳,张烈辉,王鑫杰.高温高盐底水油藏强化泡沫体系试验研究[J].石油钻探技术,2015,43(2):97-103.