空间弯管管束固有频率及附加质量系数计算

详细信息    查看全文 | 推荐本文 |

英文篇名：Calculation of Natural Frequency and Added Mass Coefficient of Spatial Bend Tube Bundle 作者：刘丽艳 ; 徐炜 ; 谭蔚 ; 李昭 ; 郭凯 英文作者：Liu Liyan;Xu Wei;Tan Wei;Li Zhao;Guo Kai;School of Chemical Engineering and Technology,Tianjin University; 关键词：中间热交换器 ; 空间弯管 ; 固有频率 ; 附加质量系数 ; 有限元方法 英文关键词：Intermediate heat exchanger;;Spatial bend tube;;Natural frequency;;Added mass coefficient;;Finite element method 中文刊名：HDLG 英文刊名：Nuclear Power Engineering 机构：天津大学化工学院; 出版日期：2019-03-14 16:20 出版单位：核动力工程 年：2019 期：v.40;No.233 基金：国家重点研发计划资助(2018YFC0808500) 语种：中文; 页：HDLG201902014 页数：6 CN：02 ISSN：51-1158/TL 分类号：66-71

摘要

在工程设计过程中,合理确定中间热交换器内空间弯管的固有频率和附加质量系数,对于该设备的安全稳定运行至关重要。本文旨在通过有限元方法计算中间换热器同心圆排布的管束在空气和液钠环境中的固有频率及附加质量系数。将管束分为3个典型区域,选取6个位置建立换热管和流体域的三维模型,计算换热管的固有频率和附加质量系数。结果表明,换热管在空气中的固有频率受空间弯管的弯曲半径影响较小,附加质量系数受空间弯管的弯曲半径和所处区域位置影响较大,近似三角形排布区域的管束固有频率最低,该区域内层换热管的附加质量系数最大。
        It is a crucial step for the safe and stable operation of the intermediate heat exchanger to determine the reasonable values of natural frequencies and added mass coefficients of the spatial bend tubes during the engineering design process. This work aims to calculate the natural frequencies and added mass coefficients of the concentric spatial bend tubes of the intermediate heat exchanger in air and liquid sodium by finite element method. The concentric tube bundle was divided into three typical areas. For these typical areas, three-dimensional models of heat exchanger tubes and fluid fields were built to calculate the natural frequencies and added mass coefficients at six places. The results show that the natural frequency of the heat transfer tubes in the air is less affected by the bending radius of the spatial bend tube, while the added mass coefficient is greatly affected by the bending radius of the spatial bend tube and the place in which it is located. The tubes located in the approximate triangular arrangement place have the lowest natural frequency and the highest added mass coefficient.

引文

[1]广东核电培训中心.900 MW压水堆核电站系统与设备[M].北京:原子能出版社,2007:87-88.
    [2]赖永星,刘敏珊,董其伍.静止外部流体对换热器管束动特性的影响分析[J].压力容器,2004,21(12):22-25.
    [3]刘敏珊,刘彤,董其伍.蒸汽发生器U形传热管动态特性影响因素分析[J].核动力工程,2008,29(2):43-47.
    [4]GANAPATHY V.Finding the natural frequency of vibration of exchanger tubes[J].Chemical Engineering,1977,84(20):122.
    [5]全国锅炉压力容器标准化技术委员会.热交换器:GB/T 151-2014[S].北京:中国标准出版社,2014.
    [6]Tubular Exchanger Manufacturers Association.TEMA-2007 Standards of Tubular Exchanger Manufacturers Association Ninth Edition[S].New York:Tubular Exchanger Manufacturers Association,2007.
    [7]PRAKASH V,THIRUMALAI M,PRABHAKAR R,et al.Assessment of flow induced vibration in a sodium-sodium heat exchanger[J].Nuclear Engineering and Design,2009,239(1):169-179.
    [8]杨志海,谭蔚,杜克铭,等.换热器管束附加质量系数的影响因素[J].化学工程,2016,44(8):25-30.
    [9]冯预恒,王一新,赵勇,等.CEFR中间热交换器一次侧数值拟[J].原子能科学技术,2014,48(7):1172-1175.
    [10]张添翼,张振兴,胡丼娜,等.CEFR中间热交换器管束结构形式对热应力影响的研究[J].核动力工程,2015,36(5):148-151.
    [11]张添翼,刘佳,张振兴.基于固有频率分析的中间热交换器管束支撑设计[J].原子能科学技术,2017,51(12):2149-2153.
    [12]MORETTI P M,LOWERY R L.Hydrodynamic inertia coefficients for a tube surrounded by rigid tubes[J].Journal of Pressure Vessel Technology,1976,98(3):190-193.
    [13]CHEN S S,WAMBSGANSS M W,JENDRZEJCZYKJ A.Added mass and damping of a vibrating rod in confined viscous fluids[J].Journal of Applied Mechanics,1976,43(2):325-329.