一种小规模立体化注水站设计

详细信息    查看全文 | 推荐本文 |

英文篇名：A Design of Small-scale Three-dimensional Water Injection Station 作者：程忠钊 英文作者：CHENG Zhongzhao;Xi'an Changqing Technology Engineering Co.,Ltd.; 关键词：注水站 ; 立体化布置 ; 模块 ; 注水橇 ; 优化设计 英文关键词：water injection station;;three-dimensional arrangement;;module;;water injection skid;;optimized design 中文刊名：YQTD 英文刊名：Oil-Gas Field Surface Engineering 机构：西安长庆科技工程有限责任公司; 出版日期：2019-04-20 出版单位：油气田地面工程 年：2019 期：v.38;No.332 语种：中文; 页：YQTD201904018 页数：4 CN：04 ISSN：23-1395/TE 分类号：81-84

摘要

为适应油田地面建设用地征地难的现状,高效利用建设用地,长庆油田采用立体化布站的设计思路,设计出一种小规模立体化注水站。立体化注水站由3个功能区组成,细分成6个模块。将配电-储水-水处理-注水功能区进行分层布置,减少了注水站的占地面积;单个功能区采用橇装化设计、工厂化预制,缩短了小型注水站的设计周期和建设周期。通过优化,注水站减少征地面积60%,缩短设计周期30%,缩短建设周期50%,同时实现了注水站井站合建,规避了重新征地的繁琐程序,提高了小型注水站现场适用性,应用效果良好。
        In order to adapt to the difficult land acquisition situation of oilfield surface construction and to use construction land efficiently,Chang Qing Oilfield brings forth a new small-scale three-dimensional water injection station by using the design idea of three-dimensional station distribution. This water injection station includes three functional areas, and can be subdivided into six units. Placing the power distribution unit, water storage unit, water treatment unit and water injection unit in different layers reduces the floor land of the station. Single functional area adopts skid-mounted design and factory prefabrication, which shortens the design and construction cycle of the small-scale water injection station. Through optimization, for the water injection station, the land acquisition can be saved by 60%,the design cycle can be shortened by 30%,and the construction cycle can be shortened by 50%.At the same time, the water injection station can be built in the well site, the complex procedures of land acquisition can be got around, the on-site suitability of small-scale station is improved, and the field application effect is good.

引文

[1]戚亚明,杨微微,张瑛,等.小型橇装密闭注水系统的设计[J].油气田地面工程,2012,31(9):44-45.QI Yaming,YANG Weiwei,ZHANG Ying,et al.Design of small skid-mounted airtight water injection system[J].Oil-Gas Field Surface Engineering,2012,31(9):44-45.
    [2]董巍,林罡,王荣敏,等.智能移动注水装置的研制[J].石油工程建设,2010,36(6):30-32.DONG Wei,LIN Gang,WANG Rongmin,et al.Development of intelligent mobile water injection device[J].Petroleum Engineering Construction,2010,36(6):30-32.
    [3]余萍.油站立体化工艺存在的问题与改进[J].油气田地面工程,2012,31(4):34-35.YU Ping.The problem and improvement of designing threedimensional oil station[J].Oil-Gas Field Surface Engineering,2012,31(4):34-35.
    [4]娄玉华,李红岩.油田转油站立体化布站的创新设计模式[J].石油规划设计,2012,23(1):7-10.LOU Yuhua,LI Hongyan.The innovative mode of designing three-dimensional oil transfer station[J].Petroleam Planning&Engineering,2012,23(1):7-10.
    [5]环境保护部,国家质量监督检查检疫总局.声环境质量标准:GB 3096-2008[S].北京:中国环境科学出版社,2013.Environmental Protection Department,General Administration of Quality Supervision,Inspection and Quarantine of the people's Republic of China.Environmental quality standard for noise:GB 3096-2008[S].Beijing:China Environmental Science Press,2013.
    [6]中华人民共和国住房和城乡建设部.钢结构设计标准:GB 50017-2017[S].北京:中国建筑工业出版社,2018.Ministry of Housing and Urban-Rural Development of the People's Republic of China.Standard for design of steel structures:GB 50017-2017[S].Beijing:China Architecture&Building Press,2018.
    [7]中华人民共和国住房和城乡建设部.油田注水工程设计规范:GB 50391-2014[S].北京:中国计划出版社,2014.Ministry of Housing and Urban-Rural Development of the People's Republic of China.Code for design of oilfield water injection engineering:GB 50391-2014[S].Beijing:China Planning Press,2014.
    [8]胡雄翼,司毅壮,刘钇池,等.集装箱式注水装置的设计与应用[J].油气田地面工程,2017,36(9):42-45.HU Xiongyi,SI Yizhuang,LIU Yichi,et al.Design and application of containerized water injection device[J].OilGas Field Surface Engineering,2017,36(9):42-45.
    [9]李永生,何茂林,齐圆圆,等.数字化橇装注水装置的结构设计[J].油气田地面工程,2012,31(4):30-31.LI Yongsheng,HE Maolin,QI Yuanyuan,et al.Structure design of digital water injection device[J].Oil-Gas Field Surface Engineering,2012,31(4):30-31.
    [10]何李鹏,谭滨,冯亚军,等.高压集气站电控一体化集成装置的设计[J].油气田地面工程,2015,34(10):64-67.HE Lipeng,TAN Bin,FENG Yajun et al.Design of electronic control integrated device for high pressure gas collection station[J].Oil-Gas Field Surface Engineering,2015,34(10):64-67.