基于CAXA软件的变距螺旋轴数控加工研究

详细信息    查看全文 | 推荐本文 |

	英文篇名：Research on NC machining of variable pitch screw shaft based on CAXA software 作者：张国瑞 ; 王旭元 ; 赵春江 关键词：螺旋轴 ; 变距 ; 数控加工 ; CAXA软件 英文关键词：spiral shaft;;variable distance;;NC machining;;CAXA software 中文刊名：JCKJ 英文刊名：China Building Materials Science & Technology 机构：内蒙古机电职业技术学院; 出版日期：2019-02-25 出版单位：中国建材科技 年：2019 期：v.28;No.163 语种：中文; 页：JCKJ201901040 页数：2 CN：01 ISSN：11-2931/TU 分类号：91+94

摘要

螺旋轴是螺旋输送机中的重要零部件,常用于输送、挤压和破碎物料。变距螺旋轴由于其螺距逐渐变化和强度要求高的特点,普通机械加工方法加工困难。本研究尝试利用国产CAXA软件对物料压缩用途的变距螺旋轴的数控加工工艺进行研究,为今后相关领域的应用与研究提供可供借鉴的实践经验和理论依据。
        The screw shaft is an important part of the screw conveyor, often used for conveying, extruding and crushing materials. Because of the gradual change of pitch and high strength requirement of variable pitch spiral shaft, it is difficult to process by ordinary machining method. This research attempts to use the domestic CAXA software to study the NC machining process of variable pitch spiral shaft for material compression, and provides practical experience and theoretical basis for future application and research in related fields.

引文

[1]ROBERTS A W.The influence of granular vortex motion on the volumetric performance of enclosed screw conveyors[J].Powder Technology,1999,104.
    [2]ZAVADSKAYA G A.Use of criteria design of experiments to optimize an auger drilconveyer[J].Journal of Mining Science,1981,17(2).
    [3]胡勇克,戴莉莉,皮亚楠.螺旋输送器的原理与设计南昌大学学报,2000,(4).
    [4]宋亚英.变距螺旋结构参数的理论研究[J].苏州大学学报,1996,12(4).
    [5]徐海军,王海英。CAXA制造工程师2013数控加工自动编程教程[M].机械工业出版社,2014.