摘要
为了指导烧结生产配矿,利用高温性能特征数对铁矿粉的高温性能进行研究。铁矿粉的高温性能特征数结合了烧结过程的各种信息参数,从而能够更加准确、全面地表征烧结铁矿粉的高温基础特性。在对7种单一矿粉进行实验分析的基础上,按照其高温性能差异,将混合矿粉中的等性能矿粉进行置换,分析置换前后混合矿的高温性能变化,并通过工业实验,验证置换前后烧结矿的质量波动。实验结果表明,在一定比例范围内,等性能矿粉置换,混合矿粉高温性能特征数变化不大,高温性能稳定,生产出烧结矿转鼓强度保持在稳定水平,质量满足高炉生产要求。可用于指导烧结配矿,为实际烧结生产提供参考依据。
In order to guide the ordination of sintering production,high temperature performance characteristic numbers were used to study the high temperature performance of iron ore fines.The high temperature performance characteristic numbers of iron ore powder combined with various information parameters of sintering process,which could characterize the high temperature characteristics more accurately and comprehensively.Based on the experimental analysis of 7 single ore fines,different kinds of equal performance ore fines in the mixed ore were replaced according to their high temperature performance difference,and the high temperature performance of the mixed ore after replacement was analyzed.Then the quality fluctuation of sintered ore before and after replacement was verified through industrial experiments.It is found through the experiments that within a certain percentage,the high temperature performance characteristic numbers of mixed ore powder change little and the high temperature performance of the mixed ore remains stable basically during the equal performance replacement.The tumbler strength of sinter is maintained at a stable level,and the quality meets the requirement of the blast furnace production,which can be used to guide the ore proportioning and provide reference for actual sintering production.
引文
[1]王筱留.钢铁冶金学:炼铁部分[M].北京:冶金工业出版社,2014.(Wang X L.Iron and Steel Metallurgy:Iron Making[M].Beijing:Metallurgy Industry Press,2014.)
[2] Okazaki J,Higuchi K,Hosotani Y,et al.Influence of iron ore characteristics on penetrating behavior of melt into ore layer[J].ISIJ International,2003,43(9):1384.
[3]金明芳.影响铁矿石液相烧结及烧结强度的因素分析[D]//沈阳:东北大学,2008.(Jin M F.Influencing Factors Analysis of Iron Ore Liquid Phase Sintering and the Sintering Strength[D]//Shenyang:Northeastern University,2008.)
[4]李光森.粘结相对烧结矿强度的影响机理及其合理组分的探讨[D]//沈阳:东北大学,2008.(Li G S.Study on Effect Mechanism of Binding Phase to Sinter’s Strength and Binding Phase’s Proper Composition[D]//Shenyang:Northeastern University,2008.)
[5]余盈昌,吴铿,赵勇,等.基于“同化性特征数”分析影响铁矿粉同化性的因素[J].有色金属科学与工程,2014,5(6):28.(Yu Y C,Wu K,Zhao Y,et al.Influencing factors of the assimilation of iron ore powder based on the“assimilation characteristic number”[J].Nonferrous Metals Science and Engineering,2014,5(6):28.)
[6]金明芳,李光森,姜鑫,等.影响烧结过程最初液相形成的因素[J].节能,2005(4):7.(Jin M F,Li G S,Jiang X,et al.Influence factors on the formation of initial melt during sintering[J].Energy Conservation,2005(4):7.)
[7]吴铿,王梦,赵勇,等.测定铁矿粉同化特性新方法的探索[J].东北大学学报:自然科学版,2013,34(7):961.(Wu K,Wang M,Zhao Y,et al.A new method for measuration of assimilation characteristics of iron ore powder[J].Journal of Northeastern:Natural Science,2013,34(7):961.)
[8]吴铿,申威,杜瑞岭,等.铁矿粉烧结液相流动性能的特征数方程的建立[J].重庆大学学报,2015,38(5):26.(Wu K,Shen W,Du R L,et al.Establishing the characteristic number equation about liquid phase fluidity of iron ore powder during sintering[J].Journal of Chongqing University,2015,38(5):26.)
[9]李孟土,李晓波,朱德庆,等.高配比镜铁矿粉混合料烧结性能改善[J].钢铁研究学报,2018,30(1):14.(Li M T,Li X B,Zhu D Q,et al.Improvement of sintering performance of sinter mixtures containing high ratio of specularite fines[J].Journal of Iron and Steel Research,2018,30(1):14.)
[10]周明顺,刘万山,窦力威,等.优化配矿试验研究与生产实践[J].烧结球团,2004,29(4):7.(Zhou M S,Liu W S,Dou L W,et al.Study and practices on optimization of ores proportioning for sintering and pelletizing[J].Sintering and Pelletizing,2004,29(4):7.)
[11]贺真.基于铁矿粉烧结基础特性的优化配矿研究[D].长沙:中南大学,2014.(He Z.Research on Optimizing Proportion for Sintering Based on Fundamental Characteristics of Iron Ore Fines[D].Changsha:Central South University,2014.)
[12]黄德军,吴铿,赵路朋,等.铁矿粉高温性能特征数的配合性研究[J].烧结球团,2016,41(5):13.(Huang D J,Wu K,Zhao L P,et al.Research on compatibility of high temperature performance characteristic numbers of iron ore fines[J].Sintering and Pelletizing,2016,41(5):13.)
[13]朱利,吴铿,申威,等.表征铁矿粉烧结液相流动性能的新方法[J].钢铁研究学报,2016,28(6):18.(Zhu L,Wu K,Shen W,et al.A new characterization method for the liquid phase fluidity of iron ore powder during sintering[J].Journal of Iron and Steel Research,2016,28(6):18.)
[14]谢运强,张中中,王子宏,等.某钢铁企业常用铁矿粉基础性能及优化配矿[J].中国冶金,2018,28(3):9.(Xie Y Q,Zhang Z Z,Wang Z H,et al.Sintering basic characteristics of iron ores used in an iron and steel plant and optimum proportioning ores[J].China Metallurgy,2018,28(3):9.)
[15]伊凤永,李福民,孙恺,等.混合矿烧结基础性能与化学成分间的关系[J].烧结球团,2013,38(2):1.(Yi F Y,Li F M,Sun K,et al.Relationship between basic sintering properties and chemical compositions of mixed iron ores fines[J].Sintering and Pelletizing,2013,38(2):1.)