Mg-Li基复合材料的研究进展（英文）
|
摘要
Mg-Li基复合材料由于具有高比强度和比刚度、良好的阻尼特性和耐磨性、以及较小的热膨胀系数,成为航空航天和军事领域的理想结构材料之一。介绍了粉末冶金、压力浸渗、搅拌铸造、薄膜冶金以及原位生成等Mg-Li基复合材料常用的制备方法,并对其优缺点进行比较。总结了Mg-Li基复合材料常用的基体合金和增强体,以及典型Mg-Li基复合材料的组织与性能。概述了Mg-Li基体复合材料中基体和增强体的界面化学。最后,针对目前存在的问题以及可能的解决途径进行了探讨。
Mg-Li matrix composites are one of the ideal structural materials in the fields of aerospace and military due to their high specific strength and stiffness, good damping and wear resistance, and small thermal expansion coefficient. The preparation technologies of Mg-Li matrix composites including powder metallurgy, pressure infiltration, stir-casting, foil metallurgy, and in-situ synthesis were introduced, and their advantages and disadvantages were compared. The common matrix alloys and reinforcements for Mg-Li matrix composites as well as the structure and performance of typical composites were mainly summarized. Then the interface chemistry between matrix and reinforcement was briefly reviewed. Finally, some problems existing at present and the possible solutions were discussed.
Mg-Li matrix composites are one of the ideal structural materials in the fields of aerospace and military due to their high specific strength and stiffness, good damping and wear resistance, and small thermal expansion coefficient. The preparation technologies of Mg-Li matrix composites including powder metallurgy, pressure infiltration, stir-casting, foil metallurgy, and in-situ synthesis were introduced, and their advantages and disadvantages were compared. The common matrix alloys and reinforcements for Mg-Li matrix composites as well as the structure and performance of typical composites were mainly summarized. Then the interface chemistry between matrix and reinforcement was briefly reviewed. Finally, some problems existing at present and the possible solutions were discussed.
引文
[1]CHANG Li-li,SHI Chun-chang,CUI Hong-wei.Enhancement of mechanical properties of duplex Mg-9Li-3Al alloy by Sn and Yaddition[J].Transactions of Nonferrous Metals Society of China,2018,28(1):30-35.
[2]WU R Z,QU Z K,ZHANG M L.Reviews on the influences of alloying elements on the microstructure and mechanical properties of Mg-Li base alloys[J].Reviews on Advanced Materials Science,2010,24(1):35-43.
[3]WANG X J,XU D K,WU R Z,CHEN X B,PENG Q M,JIN L,XIN Y C,ZHANG Z Q,LIU Y,CHEN X H,CHEN G,DENG K K,WANG H Y.What is going on in magnesium alloys?[J].Journal of Materials Science&Technology,2018,34(2):245-247.
[4]SUN Yue-hua,WANG Ri-chu,PENG Chao-qun,FENG Yan,YANG Ming.Corrosion behavior and surface treatment of superlight Mg-Li alloys[J].Transactions of Nonferrous Metals Society of China,2017,27(7):1455-1475.
[5]HOU L,WANG T,WU R,ZHANG J,ZHANG M,DONG A,SUNB,BETSOFEN S,KRIT B.Microstructure and mechanical properties of Mg-5Li-1Al sheets prepared by accumulative roll bonding[J].Journal of Materials Science&Technology,2018,34(2):317-323.
[6]CUI C,WU L,WU R,ZHANG J,ZHANG M.Influence of yttrium on microstructure and mechanical properties of as-cast Mg-5Li-3Al-2Zn alloy[J].Journal of Alloys and Compounds,2011,509(37):9045-9049.
[7]WEI X W,ZU X T,FU H,ZHOU W L.Compressive creep resistance of Mg-14Li-Al-MgO/Mg2Si composites[J].Materials Science and Technology,2006,22(8):903-907.
[8]KúDELA S.Magnesium-lithium matrix composites-An overview[J].International Journal of Materials&Product Technology,2003,18(1-3):91-115.
[9]WANG W J,GAUTHIER-BRUNET V,BEI G P,LAPLANCHE G,BONNEVILLE J,JOULAIN A,DUBOIS S.Powder metallurgy processing and compressive properties of Ti3AlC2/Al composites[J].Materials Science and Engineering A,2011,530:168-173.
[10]WU L,WU R,HOU L,ZHANG J,SUN J,ZHANG M.Microstructure and mechanical properties of CNT-reinforced AZ31matrix composites prepared using hot-press sintering[J].Journal of Materials Engineering&Performance,2017,26(42):1-6.
[11]LI C,WANG Z,WANG H,ZHU X,WU M,JIANG Q.Fabrication of nano-SiC particulate reinforced Mg-8Al-1Sn composites by powder metallurgy combined with hot extrusion[J].Journal of Materials Engineering&Performance,2016,25(11):5049-5054.
[12]WHALEN R T,GONZáLEZ-DONCEL G,ROBINSON S L,SHERBY O D.Mechanical properties of particulate composites based on a body-centered-cubic Mg-Li alloy containing boron[J].Scripta Metallurgica,1989,23(1):137-140.
[13]TROJANOVáZ,DROZD Z,KúDELA S,SZáRAZ Z,LUKá?P.Strengthening in Mg-Li matrix composites[J].Composites Science and Technology,2007,67(9):1965-1973.
[14]DROZD Z,TROJANOVáZ,KúDELA S.Degradation of the mechanical properties of a Mg-Li-Al composite at elevated temperatures studied by the stress relaxation technique[J].Materials Science and Engineering A,2007,462(1-2):234-238.
[15]ZHANG M,ELKIN F M.Ultralight magnesium-lithium alloy[M].Beijing:Science Press,2010.(in Chinese).
[16]EL-SABBAGH A M,SOLIMAN M,TAHA M A,PALKOWSKI H.Effect of rolling and heat treatment on tensile behaviour of wrought Al-SiCp composites prepared by stir-casting[J].Journal of Materials Processing Technology,2013,213(10):1669-1681.
[17]ZHU Y,JIN P,ZHAO P,WANG J,HAN L,FEI W.Hot deformation behavior of Mg2B2O5 whiskers reinforced AZ31B magnesium composite fabricated by stir-casting[J].Materials Science and Engineering A,2013,573(3):148-153.
[18]WANG H L,WU G Q,ZHANG D C,LIN J G,GONG L J,MA M,PENG Q.Microstructural evolution in an ultra-fine YAl2p reinforced Mg-14Li-3Al composite during warm-rolling[J].Materials Characterization,2015,104:86-91.
[19]GONZáLEZ-DONCEL G,WOLFENSTINE J,METENIER P,RUANO O A,SHERBY O D.The use of foil metallurgy processing to achieve ultrafine grained Mg-9Li laminates and Mg-9Li-5B4Cparticulate composites[J].Journal of Materials Science,1990,25(10):4535-4540.
[20]XU T C,PENG X D,QIN J,CHEN Y F,YANG Y,WEI G B.Dynamic recrystallization behavior of Mg-Li-Al-Nd duplex alloy during hot compression[J].Journal of Alloys and Compounds,2015,639:79-88.
[21]DONG H,WANG L,LIU K,WANG L,JIANG B,PAN F.Microstructure and deformation behaviors of two Mg-Li dual-phase alloys with an increasing tensile speed[J].Materials and Design,2016,90:157-164.
[22]KIM Y,KIM J,YU H,CHOI J,SON H.Microstructure and mechanical properties of Mg-x Li-3Al-1Sn-0.4Mn alloys(x=5,8and 11 wt.%)[J].Journal of Alloys and Compounds,2014,583:15-20.
[23]ZHANG D,MA C,QIN J,WU R,SAKATA T,MORI H.Interfacial structure and mechanical properties of MgLi matrix composites[J].Composite Interfaces,2001,8(5):383-391.
[24]WU G,ZHANG T,SHA W,WANG S,HUANG Z.Aging behavior of YAl2p/Mg-14Li-1Al composite[J].Rare Metal Materials and Engineering,2014,43(12):2958-2961.
[25]LI C Q,XU D K,WANG B J,SHENG L Y,QIAO Y X,HAN E H.Natural ageing responses of duplex structured Mg-Li based alloys[J].Scientific Reports,2017,7:40078.
[26]KANG Z X,LIN K,ZHANG J Y.Characterisation of Mg-Li alloy processed by solution treatment and large strain rolling[J].Materials Science and Technology,2016,32(5):1743284715Y.000.
[27]WU R,ZHANG M.Microstructure,mechanical properties and aging behavior of Mg-5Li-3Al-2Zn-x Ag[J].Materials Science and Engineering A,2009,520(1):36-39.
[28]SONG Y,SHAN D,CHEN R,HAN E.Effect of second phases on the corrosion behaviour of wrought Mg-Zn-Y-Zr alloy[J].Corrosion Science,2010,52(5):1830-1837.
[29]WOLFENSTINE J,GONZáLEZ-DONCEL G,SHERBY O D.Elevated temperature properties of Mg-14Li-B particulate composites[J].Journal of Materials Research,1990,5(7):1359-1362.
[30]WOLFENSTINE J,GONZáLEZ-DONCEL G,SHERBY O D.Tension versus compression superplastic behavior of a Mg-9wt.%Li-5wt.%B4C composite[J].Materials Letters,1992,15(4):305-308.
[31]WU Li-bin,MENG Xiang-rui,WU Rui-zhi,CUI Chong-liang,ZHANG Mi-lin,ZHANG Jing-huai.Solid-state composite technology for B4Cp reinforced magnesium-lithium alloy[J].Transactions of Nonferrous Metals Society of China,2011,21(4):820-824.
[32]DONG Q,LIU Z,LIANG X,TAO Y.Effect of hot extrusion on microstructure and mechanical properties of Mg-Li based composite materials reinforced by boron compound[J].Materials Science and Engineering of Powder Metallurgy,2014,19(1):60-65.(in Chinese)
[33]YU H,MIN H,WANG D,CHEN X.Study on the thermodynamics of Mg-Li composites prepared by reaction synthesis[J].Chinese Journal of Rare Metals,1997,2:77-80.(in Chinese)
[34]LU Q,YU H,MIN G,WANG C,FENG G.The interface structure of the Mg-Li composites reinforced by MgO/Mg2Si[J].Rare Metal Materials and Engineering,2005,34(9):1427-1429.(in Chinese)
[35]YU H,MIN G,WANG D,CHEN X.Microstructure and mechanical properties of Mg-Li-MgO/Mg2Si composite prepared by reaction synthesis in liquid[J].Chinese Journal of Rare Metals,2000,24(1):21-24.(in Chinese)
[36]LUO G X,WU G Q,WANG S J,LI R H,HUANG Z.Effect of YAl2particulates on microstructure and mechanical properties ofβ-Mg-Li alloy[J].Journal of Materials Science,2006,41(17):5556-5558.
[37]CHIANEH V A,HOSSEINI H R M,NOFAR M.Micro structural features and mechanical properties of Al-Al3Ti composite fabricated by in-situ powder metallurgy route[J].Journal of Alloys and Compounds,2009,473(1-2):127-132.
[38]LAPLANCHE G,JOULAIN A,BONNEVILLE J,SCHALLER R,KABIR T E.Microstructures and mechanical properties of Al-base composite materials reinforced by Al-Cu-Fe particles[J].Journal of Alloys and Compounds,2010,493(1-2):453-460.
[39]WU G Q,LING Z H,ZHANG X,WANG S J,ZHANG T,HUANGZ.Research on YAl2 intermetallics particles reinforced Mg-14Li-3Al matrix composites[J].Journal of Alloys and Compounds,2010,507(1):137-141.
[40]WANG S J,WU G Q,LI R H,LUO G X,HUANG Z.Microstructures and mechanical properties of 5 wt.%Al2Yp/Mg-Li composite[J].Materials Letters,2006,60(15):1863-1865.
[41]ZHANG Q Q,WU G Q,NIU L Y,HUANG Z,TAO Y.Effects of heat treatment on interface and mechanical properties of YAl2reinforced Mg-14Li-3Al matrix composite[J].Materials Science and Engineering A,2013,564(3):298-302.
[42]MASON J F,WARWICK C M,SMITH P J,CHARLES J A,CLYNET W.Magnesium-lithium alloys in metal matrix composites-Apreliminary report[J].Journal of Materials Science,1989,24(11):3934-3946.
[43]TROJANOVáZ,DROZD Z,LUKá?P,KúDELA S.Deformation processes in Mg-Li-Al base composites[J].Materials Science Forum,2003,419-422:817-822.
[44]KúDELA S,RENNEKAMP R,BAUNACK S,GERGELY V,OSWALD S,WETZIG K.TEM study of the fibre cross-section attack inδ-Al2O3/Mg8Li metal matrix composites[J].Microchimica Acta,1997,127(3-4):243-252.
[45]JR S K,WENDROCK H,KúDELA S,PAWE?EK A,PIATKOWSKI A,WETZIG K.Fracture behavior of Mg-Li matrix composites[J].International Journal of Materials Research,2009,100(06):910-914.
[46]KúDELA S,WENDROCK H,JR S K,PTá?EK L,MENZEL S,WETZIG K.Effect of interfaces on fiber fracture in Mg and MgLi matrix composites[J].Materials Science Forum,2005,482:355-358.
[47]BAUNACK S,JOHN A,KúDELA S,WETZIG K.In-situ characterization of MgLi composite materials by means of AES and factor analysis[J].Microchimica Acta,1997,125(1-4):245-249.
[48]KúDELA S,OSWALD S,JR S K,BAUNACK S,WETZIG K.The ion exchange promoted interfacial strength in magnesium based composites[J].Journal of Alloys and Compounds,2004,378(1-2):127-131.
[49]JR S K,RUDAJEVOVáA,KúDELA S.Anisotropy of thermal expansion in Mg-and Mg4Li-matrix composites reinforced by short alumina fibers[J].Materials Science and Engineering A,2007,462(1-2):239-242.
[50]WILCOX B A,CLAUER A H.Tensile and creep deformation of a fiber reinforced Mg-Li alloy[J].Composites,1969,1(1):62.
[51]KúDELA S,JOHN A,BAUNACK S,JR S K,WETZIG K.Auger spectroscopy study of MgLi melt affected carbon/pyrocarbon fibres[J].Applied Surface Science,2001,179(1-4):129-132.
[52]KUDELA S,GERGELY V,J?NSCH E,HOFMANN A,BAUNACKS,OSWALD S,WETZIG K.Compatibility between PAN-based carbon fibres and Mg8Li alloy during the pressure infiltration process[J].Journal of Materials Science,1994,29(21):5576-5582.
[53]HELMER T,PETERLIK H,KROMP K.Coating of carbon fibersThe strength of the fibers[J].Journal of the American Ceramic Society,1995,78(1):133-136.
[54]KúDELA S,GERGELY V,SCHWEIGHOFER A,BAUNACK S,OSWALD S,WETZIG K.Theδ-Al2O3(Saffil)fibre degradation during infiltration with MgLi alloy[J].Journal of Materials Science,1994,29(19):5071-5077.
[55]KúDELA S,GERGELY V,SMR?OK L,OSWALD S,BAUNACKS,WETZIG K.Phase transformation ofδAl2O3(Saffil)fibres during their interaction with molten MgLi alloys[J].Journal of Materials Science,1996,31(6):1595-1602.
[56]JOHN A,BAUNACK S,KúDELA S,WETZIG K.In-situ fracture investigations of MgLi-carbon fibre composite materials by AES and data analysis by means of factor and cluster analysis[J].Fresenius Journal of Analytical Chemistry,1997,357(7):886-893.
[2]WU R Z,QU Z K,ZHANG M L.Reviews on the influences of alloying elements on the microstructure and mechanical properties of Mg-Li base alloys[J].Reviews on Advanced Materials Science,2010,24(1):35-43.
[3]WANG X J,XU D K,WU R Z,CHEN X B,PENG Q M,JIN L,XIN Y C,ZHANG Z Q,LIU Y,CHEN X H,CHEN G,DENG K K,WANG H Y.What is going on in magnesium alloys?[J].Journal of Materials Science&Technology,2018,34(2):245-247.
[4]SUN Yue-hua,WANG Ri-chu,PENG Chao-qun,FENG Yan,YANG Ming.Corrosion behavior and surface treatment of superlight Mg-Li alloys[J].Transactions of Nonferrous Metals Society of China,2017,27(7):1455-1475.
[5]HOU L,WANG T,WU R,ZHANG J,ZHANG M,DONG A,SUNB,BETSOFEN S,KRIT B.Microstructure and mechanical properties of Mg-5Li-1Al sheets prepared by accumulative roll bonding[J].Journal of Materials Science&Technology,2018,34(2):317-323.
[6]CUI C,WU L,WU R,ZHANG J,ZHANG M.Influence of yttrium on microstructure and mechanical properties of as-cast Mg-5Li-3Al-2Zn alloy[J].Journal of Alloys and Compounds,2011,509(37):9045-9049.
[7]WEI X W,ZU X T,FU H,ZHOU W L.Compressive creep resistance of Mg-14Li-Al-MgO/Mg2Si composites[J].Materials Science and Technology,2006,22(8):903-907.
[8]KúDELA S.Magnesium-lithium matrix composites-An overview[J].International Journal of Materials&Product Technology,2003,18(1-3):91-115.
[9]WANG W J,GAUTHIER-BRUNET V,BEI G P,LAPLANCHE G,BONNEVILLE J,JOULAIN A,DUBOIS S.Powder metallurgy processing and compressive properties of Ti3AlC2/Al composites[J].Materials Science and Engineering A,2011,530:168-173.
[10]WU L,WU R,HOU L,ZHANG J,SUN J,ZHANG M.Microstructure and mechanical properties of CNT-reinforced AZ31matrix composites prepared using hot-press sintering[J].Journal of Materials Engineering&Performance,2017,26(42):1-6.
[11]LI C,WANG Z,WANG H,ZHU X,WU M,JIANG Q.Fabrication of nano-SiC particulate reinforced Mg-8Al-1Sn composites by powder metallurgy combined with hot extrusion[J].Journal of Materials Engineering&Performance,2016,25(11):5049-5054.
[12]WHALEN R T,GONZáLEZ-DONCEL G,ROBINSON S L,SHERBY O D.Mechanical properties of particulate composites based on a body-centered-cubic Mg-Li alloy containing boron[J].Scripta Metallurgica,1989,23(1):137-140.
[13]TROJANOVáZ,DROZD Z,KúDELA S,SZáRAZ Z,LUKá?P.Strengthening in Mg-Li matrix composites[J].Composites Science and Technology,2007,67(9):1965-1973.
[14]DROZD Z,TROJANOVáZ,KúDELA S.Degradation of the mechanical properties of a Mg-Li-Al composite at elevated temperatures studied by the stress relaxation technique[J].Materials Science and Engineering A,2007,462(1-2):234-238.
[15]ZHANG M,ELKIN F M.Ultralight magnesium-lithium alloy[M].Beijing:Science Press,2010.(in Chinese).
[16]EL-SABBAGH A M,SOLIMAN M,TAHA M A,PALKOWSKI H.Effect of rolling and heat treatment on tensile behaviour of wrought Al-SiCp composites prepared by stir-casting[J].Journal of Materials Processing Technology,2013,213(10):1669-1681.
[17]ZHU Y,JIN P,ZHAO P,WANG J,HAN L,FEI W.Hot deformation behavior of Mg2B2O5 whiskers reinforced AZ31B magnesium composite fabricated by stir-casting[J].Materials Science and Engineering A,2013,573(3):148-153.
[18]WANG H L,WU G Q,ZHANG D C,LIN J G,GONG L J,MA M,PENG Q.Microstructural evolution in an ultra-fine YAl2p reinforced Mg-14Li-3Al composite during warm-rolling[J].Materials Characterization,2015,104:86-91.
[19]GONZáLEZ-DONCEL G,WOLFENSTINE J,METENIER P,RUANO O A,SHERBY O D.The use of foil metallurgy processing to achieve ultrafine grained Mg-9Li laminates and Mg-9Li-5B4Cparticulate composites[J].Journal of Materials Science,1990,25(10):4535-4540.
[20]XU T C,PENG X D,QIN J,CHEN Y F,YANG Y,WEI G B.Dynamic recrystallization behavior of Mg-Li-Al-Nd duplex alloy during hot compression[J].Journal of Alloys and Compounds,2015,639:79-88.
[21]DONG H,WANG L,LIU K,WANG L,JIANG B,PAN F.Microstructure and deformation behaviors of two Mg-Li dual-phase alloys with an increasing tensile speed[J].Materials and Design,2016,90:157-164.
[22]KIM Y,KIM J,YU H,CHOI J,SON H.Microstructure and mechanical properties of Mg-x Li-3Al-1Sn-0.4Mn alloys(x=5,8and 11 wt.%)[J].Journal of Alloys and Compounds,2014,583:15-20.
[23]ZHANG D,MA C,QIN J,WU R,SAKATA T,MORI H.Interfacial structure and mechanical properties of MgLi matrix composites[J].Composite Interfaces,2001,8(5):383-391.
[24]WU G,ZHANG T,SHA W,WANG S,HUANG Z.Aging behavior of YAl2p/Mg-14Li-1Al composite[J].Rare Metal Materials and Engineering,2014,43(12):2958-2961.
[25]LI C Q,XU D K,WANG B J,SHENG L Y,QIAO Y X,HAN E H.Natural ageing responses of duplex structured Mg-Li based alloys[J].Scientific Reports,2017,7:40078.
[26]KANG Z X,LIN K,ZHANG J Y.Characterisation of Mg-Li alloy processed by solution treatment and large strain rolling[J].Materials Science and Technology,2016,32(5):1743284715Y.000.
[27]WU R,ZHANG M.Microstructure,mechanical properties and aging behavior of Mg-5Li-3Al-2Zn-x Ag[J].Materials Science and Engineering A,2009,520(1):36-39.
[28]SONG Y,SHAN D,CHEN R,HAN E.Effect of second phases on the corrosion behaviour of wrought Mg-Zn-Y-Zr alloy[J].Corrosion Science,2010,52(5):1830-1837.
[29]WOLFENSTINE J,GONZáLEZ-DONCEL G,SHERBY O D.Elevated temperature properties of Mg-14Li-B particulate composites[J].Journal of Materials Research,1990,5(7):1359-1362.
[30]WOLFENSTINE J,GONZáLEZ-DONCEL G,SHERBY O D.Tension versus compression superplastic behavior of a Mg-9wt.%Li-5wt.%B4C composite[J].Materials Letters,1992,15(4):305-308.
[31]WU Li-bin,MENG Xiang-rui,WU Rui-zhi,CUI Chong-liang,ZHANG Mi-lin,ZHANG Jing-huai.Solid-state composite technology for B4Cp reinforced magnesium-lithium alloy[J].Transactions of Nonferrous Metals Society of China,2011,21(4):820-824.
[32]DONG Q,LIU Z,LIANG X,TAO Y.Effect of hot extrusion on microstructure and mechanical properties of Mg-Li based composite materials reinforced by boron compound[J].Materials Science and Engineering of Powder Metallurgy,2014,19(1):60-65.(in Chinese)
[33]YU H,MIN H,WANG D,CHEN X.Study on the thermodynamics of Mg-Li composites prepared by reaction synthesis[J].Chinese Journal of Rare Metals,1997,2:77-80.(in Chinese)
[34]LU Q,YU H,MIN G,WANG C,FENG G.The interface structure of the Mg-Li composites reinforced by MgO/Mg2Si[J].Rare Metal Materials and Engineering,2005,34(9):1427-1429.(in Chinese)
[35]YU H,MIN G,WANG D,CHEN X.Microstructure and mechanical properties of Mg-Li-MgO/Mg2Si composite prepared by reaction synthesis in liquid[J].Chinese Journal of Rare Metals,2000,24(1):21-24.(in Chinese)
[36]LUO G X,WU G Q,WANG S J,LI R H,HUANG Z.Effect of YAl2particulates on microstructure and mechanical properties ofβ-Mg-Li alloy[J].Journal of Materials Science,2006,41(17):5556-5558.
[37]CHIANEH V A,HOSSEINI H R M,NOFAR M.Micro structural features and mechanical properties of Al-Al3Ti composite fabricated by in-situ powder metallurgy route[J].Journal of Alloys and Compounds,2009,473(1-2):127-132.
[38]LAPLANCHE G,JOULAIN A,BONNEVILLE J,SCHALLER R,KABIR T E.Microstructures and mechanical properties of Al-base composite materials reinforced by Al-Cu-Fe particles[J].Journal of Alloys and Compounds,2010,493(1-2):453-460.
[39]WU G Q,LING Z H,ZHANG X,WANG S J,ZHANG T,HUANGZ.Research on YAl2 intermetallics particles reinforced Mg-14Li-3Al matrix composites[J].Journal of Alloys and Compounds,2010,507(1):137-141.
[40]WANG S J,WU G Q,LI R H,LUO G X,HUANG Z.Microstructures and mechanical properties of 5 wt.%Al2Yp/Mg-Li composite[J].Materials Letters,2006,60(15):1863-1865.
[41]ZHANG Q Q,WU G Q,NIU L Y,HUANG Z,TAO Y.Effects of heat treatment on interface and mechanical properties of YAl2reinforced Mg-14Li-3Al matrix composite[J].Materials Science and Engineering A,2013,564(3):298-302.
[42]MASON J F,WARWICK C M,SMITH P J,CHARLES J A,CLYNET W.Magnesium-lithium alloys in metal matrix composites-Apreliminary report[J].Journal of Materials Science,1989,24(11):3934-3946.
[43]TROJANOVáZ,DROZD Z,LUKá?P,KúDELA S.Deformation processes in Mg-Li-Al base composites[J].Materials Science Forum,2003,419-422:817-822.
[44]KúDELA S,RENNEKAMP R,BAUNACK S,GERGELY V,OSWALD S,WETZIG K.TEM study of the fibre cross-section attack inδ-Al2O3/Mg8Li metal matrix composites[J].Microchimica Acta,1997,127(3-4):243-252.
[45]JR S K,WENDROCK H,KúDELA S,PAWE?EK A,PIATKOWSKI A,WETZIG K.Fracture behavior of Mg-Li matrix composites[J].International Journal of Materials Research,2009,100(06):910-914.
[46]KúDELA S,WENDROCK H,JR S K,PTá?EK L,MENZEL S,WETZIG K.Effect of interfaces on fiber fracture in Mg and MgLi matrix composites[J].Materials Science Forum,2005,482:355-358.
[47]BAUNACK S,JOHN A,KúDELA S,WETZIG K.In-situ characterization of MgLi composite materials by means of AES and factor analysis[J].Microchimica Acta,1997,125(1-4):245-249.
[48]KúDELA S,OSWALD S,JR S K,BAUNACK S,WETZIG K.The ion exchange promoted interfacial strength in magnesium based composites[J].Journal of Alloys and Compounds,2004,378(1-2):127-131.
[49]JR S K,RUDAJEVOVáA,KúDELA S.Anisotropy of thermal expansion in Mg-and Mg4Li-matrix composites reinforced by short alumina fibers[J].Materials Science and Engineering A,2007,462(1-2):239-242.
[50]WILCOX B A,CLAUER A H.Tensile and creep deformation of a fiber reinforced Mg-Li alloy[J].Composites,1969,1(1):62.
[51]KúDELA S,JOHN A,BAUNACK S,JR S K,WETZIG K.Auger spectroscopy study of MgLi melt affected carbon/pyrocarbon fibres[J].Applied Surface Science,2001,179(1-4):129-132.
[52]KUDELA S,GERGELY V,J?NSCH E,HOFMANN A,BAUNACKS,OSWALD S,WETZIG K.Compatibility between PAN-based carbon fibres and Mg8Li alloy during the pressure infiltration process[J].Journal of Materials Science,1994,29(21):5576-5582.
[53]HELMER T,PETERLIK H,KROMP K.Coating of carbon fibersThe strength of the fibers[J].Journal of the American Ceramic Society,1995,78(1):133-136.
[54]KúDELA S,GERGELY V,SCHWEIGHOFER A,BAUNACK S,OSWALD S,WETZIG K.Theδ-Al2O3(Saffil)fibre degradation during infiltration with MgLi alloy[J].Journal of Materials Science,1994,29(19):5071-5077.
[55]KúDELA S,GERGELY V,SMR?OK L,OSWALD S,BAUNACKS,WETZIG K.Phase transformation ofδAl2O3(Saffil)fibres during their interaction with molten MgLi alloys[J].Journal of Materials Science,1996,31(6):1595-1602.
[56]JOHN A,BAUNACK S,KúDELA S,WETZIG K.In-situ fracture investigations of MgLi-carbon fibre composite materials by AES and data analysis by means of factor and cluster analysis[J].Fresenius Journal of Analytical Chemistry,1997,357(7):886-893.
© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号 地址：北京市海淀区学院路29号 邮编：100083 电话：办公室：(+86 10)66554848；文献借阅、咨询服务、科技查新：66554700 |