局部预负荷对可倾瓦轴承性能的影响

详细信息    查看全文 | 推荐本文 |

英文篇名：Effects of Local Preload on the Performance of Tilting Pad Bearings 作者：祝剑虹 ; 许永利 英文作者：ZHU Jianhong;XU Yongli;School of Energy Engineering,Zhejiang University;Zhejiang Shenfa Bearing Co.,Ltd.; 关键词：燃气轮机 ; 可倾瓦轴承 ; 局部预负荷 ; 热弹流分析 英文关键词：gas turbine;;tilting pad bearing;;local preload;;thermo-elasto-hydrodynamic analysis 中文刊名：DONG 英文刊名：Journal of Chinese Society of Power Engineering 机构：浙江大学能源工程学院;浙江申发轴瓦股份有限公司; 出版日期：2018-07-15 出版单位：动力工程学报 年：2018 期：v.38;No.283 基金：2016年度浙江省省级引智资助项目(Z20160082) 语种：中文; 页：DONG201807005 页数：6 CN：07 ISSN：31-2041/TK 分类号：32-37

摘要

为研究局部预负荷系数对可倾瓦轴承性能的影响,基于热弹流动力润滑理论建立了一种局部预负荷系数可变的可倾瓦轴承模型,研究了某高速燃气轮机五瓦可倾轴承的局部预负荷系数对轴承的影响。结果表明:可倾瓦轴承刚度、阻尼系数随瓦块预负荷系数的增大而增大,不同方向刚度、阻尼系数受影响程度与瓦块支点位置有关;对于局部预负荷系数变化方向上的相关瓦块,最高瓦温、瓦面最高压力随局部预负荷系数的增大而升高,最小油膜厚度的变化刚好相反,且这些瓦块受影响程度要远大于其他瓦块;局部瓦块预负荷系数增大,轴承静平衡位置向远离瓦面的方向移动,反之则向靠近瓦面的方向移动;随局部预负荷系数的增大,润滑油流量减小,轴承功耗增大。
        To study the effects of local preload on the performance of tilting pad bearings,a model was established for the bearing based on thermo-elasto-hydrodynamic lubrication theory,which was applied to the analysis of a five-pad tilting-pad bearing for a high-speed gas turbine.Results show that the stiffness and damping of a tilting pad bearing increase with the rise of local preload,which are affected by the location of pad pivots in different directions.For the pads in the direction with changing local preload,their maximum babbit temperature and pad pressure increase with rising local preload,while the minimum thickness of oil film decreases,and the influence on these pads would be greater than those in other directions.If local preload rises,the static equilibrium position would move away from the pad,which will move towards the pad if the local preload decreases.The lubrication oil flow reduces with rising local preload,resulting in increased power loss of the bearing.

引文

[1]WYGANT K D.The influence of negative preload and non-synchronous excitation on the performance of tilting pad journal bearings[D].Charlottesville,Virginia,USA:University of Virginia,2001.
    [2]朱爱斌,杨玉磊,陈渭,等.四瓦可倾瓦轴承瓦块摆动特性[J].机械工程学报,2014,50(9):43-47.ZHU Aibin,YANG Yulei,CHEN Wei,et al.Swing characteristic of pads in four-pad tilting pad bearing[J].Journal of Mechanical Engineering,2014,50(9):43-47.
    [3]何国安,常屹,张学延,等.预负荷调整在可倾瓦轴承不稳定振动处理中的应用[J].中国电力,2012,45(11):36-40.HE Guoan,CHANG Yi,ZHANG Xueyan,et al.Application of preload factor to eliminating unstable vibration of tilting pad bearings[J].Electric Power,2012,45(11):36-40.
    [4]肖萍,陈彦峰,李启行,等.可倾瓦轴承预负荷对转子稳定性的影响[J].风机技术,2015,57(3):31-36.XIAO Ping,CHEN Yanfeng,LI Qihang,et al.Effects of tilting pad bearing preload on the rotor stability[J].Compressor,Blower&Fan Technology,2015,57(3):31-36.
    [5]潘国民,浦琪琦,张江涛.五瓦可倾瓦轴承-转子系统临界转速的研究[J].动力工程学报,2014,34(7):582-588.PAN Guomin,PU Qiqi,ZHANG Jiangtao.Study on critical rotating speed of a five-pad tilting-pad bearing-rotor system[J].Journal of Chinese Society of Power Engineering,2014,34(7):582-588.
    [6]袁小阳,欧阳武,邓谦,等.由可控可倾瓦块和承载瓦块构成的一种变性能径向轴承:CN102562783A[P].2012-07-11.
    [7]郭勇.大机组可倾瓦轴承稳定性分析技术和性能试验[D].西安:西安交通大学,2012.
    [8]CHANG Qiuying,YANG Peiran,MENG Yonggang,et al.Thermoelastohydrodynamic analysis of the static performance of tilting-pad journal bearings with the Newton-Raphson method[J].Tribology International,2002,35(4):225-234.
    [9]REDDY D S K,SWARNAMANI S,PRABHU B S.Thermoelastohydrodynamic analysis of tilting pad journal bearing-theory and experiments[J].Tribology Transactions,2000,43(1):82-90
    [10]DOWSON D.A generalized Reynolds equation for fluid-film lubrication[J].International Journal of Mechanical Sciences,1962,4(2):159-170.