圆管双头冲孔与翻孔模具设计

详细信息    查看全文 | 推荐本文 |

英文篇名：Design of piercing die and plunging die for both ends of round tube 作者：邓汝荣 ; 郧鹏 ; 李有兵 英文作者：DENG Ru-rong;YUN Peng;LI You-bing;Guangzhou Vocational College of Science and Technology;Guangzhou City Construction College; 关键词：圆管 ; 冲孔 ; 翻孔 ; 凸凹模 ; 模具结构 英文关键词：round tube;;punching;;hole flanging;;punch-matrix;;die structure 中文刊名：MJGY 英文刊名：Die & Mould Industry 机构：广州科技职业技术学院;广州城建职业学院; 出版日期：2018-04-15 出版单位：模具工业 年：2018 期：v.44;No.446 基金：2018年“攀登计划”广东大学生科技创新培育专项资金项目(pdjh2018b0967);; 2016年中山市科技计划项目(2016A1001) 语种：中文; 页：MJGY201804007 页数：4 CN：04 ISSN：45-1158/TG 分类号：37-40

摘要

介绍了一种铝合金圆管双头冲孔与翻孔模具,描述了该模具的结构组成,介绍了凸模、凸凹模、凸凹模保护结构及限位结构等工作原理。实践表明,该模具可适用于生产不同管径和长度的圆管系列零件,模具结构简单紧凑,提高了生产效率,降低了模具制造成本。
        The design of piercing die and plunging die for both ends of round tube was introduced,and the structure of the die was described in detail.The working principle of the punch,punch-matrix,the protection structure and limit structure of the punch-matrix were described.The practice showed that the structure was suitable for the series of tubes with different diameters and lengths.Practice proved that different diameter and length of the tube could be produced by the die and the structure of the die was simple and compact.

引文

[1]胡春莲,高峰,邵振江,等.离合器踏板安装支架多工位级进模设计[J].模具工业,2016,42(1):14-18.
    [2]严昌贤,刘立如,李文胜,等.支架多工位级进模设计[J].模具工业,2014,40(4):23-26.
    [3]陈超,肖良红.文件夹面壳多工位级进模设计[J].模具工业,2014,40(3):20-23.
    [4]常桂静,梁贵荣,曾兵华,等.汽车侧围外板成形仿真及工艺优化[J].模具工业,2015,41(2):73-76.
    [5]万俊,王祖华,郭银芳,等.安全带插片级进模设计[J].模具工业,2015,41(12):15-16.
    [6]刘玉杰,程晓新.燃油箱托架冲孔模设计[J].模具工业,2015,41(11):34-36.