Electrochemiluminescence Detection of Escherichia coli O157:H7 Based on a Novel Polydopamine Surface Imprinted Polymer Biosensor

详细信息    查看全文

• 作者：Shufan Chen ; Xueqian Chen ; Lijuan Zhang ; Juanjuan Gao ; Qiang Ma
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2017
• 出版时间：February 15, 2017
• 年：2017
• 卷：9
• 期：6
• 页码：5430-5436
• 全文大小：426K
• ISSN：1944-8252

文摘

In this paper, a facilely prepared electrochemiluminescence (ECL) biosensor was developed for Escherichia coli O157:H7 quantitative detection based on a polydopamine (PDA) surface imprinted polymer (SIP) and nitrogen-doped graphene quantum dots (N-GQDs). N-GQDs with a high quantum yield of 43.2% were synthesized. The uniform PDA SIP film for E. coli O157:H7 was established successfully with a facile route. The dopamine and target bacteria were electropolymerized directly on the electrode. After removal of the E. coli O157:H7 template, the established PDA SIP can selectively recognize E. coli O157:H7. Accordingly, E. coli O157:H7 polyclonal antibody (pAb) was labeled with N-GQDs. The bioconjugation of SIP–E. coli O157:H7/pAb-N-GQDs can generate intensive ECL irradiation with K₂S₂O₈. As a result, E. coli O157:H7 was detected with the ECL sensing system. Under optimal conditions, the linear relationships between the ECL intensity and E. coli O157:H7 concentration were obtained from 10¹ colony-forming units (CFU) mL^–1 to 10⁷ CFU mL^–1 with a limit of detection of 8 CFU mL^–1. The biosensor based on this SIP film was applied in water sample detection successfully. The N-GQD-based ECL analytical method for E. coli O157:H7 was reported for the first time. The sensing system had high selectivity to the target analyte, provided new opportunities for use, and increased the rate of disease diagnosis and treatment and the prevention of pathogens.