Effect of heat treatment on microstructure and dimensional stability of ZL114A aluminum alloy

详细信息    查看全文

• 作者：Long-tao JIANG ; Gao-hui WU ; Wen-shu YANG ; Yong-gang ZHAO ; Shan-shan LIU
• 关键词：ZL114A alloy ; microstructure ; heat treatment ; dimensional stability
• 刊名：Transactions of Nonferrous Metals Society of China
• 出版年：2010
• 出版时间：November 2010
• 年：2010
• 卷：20
• 期：11
• 页码：2124-2128
• 全文大小：1264 K

文摘

The effects of heat treatment process on microstructure, micro-yield strength and dynamic dimensional stability of ZL114A aluminum alloy were investigated by optical microscopy (OM), transmission electron microscopy (TEM), tensile testing and thermal cycling on-line measuring method. Fine dispersed eutectic Si phases are observed, and long strip eutectic Si and massive primary Si phases decrease in ZL114A alloy after high-temperature and long-time solution treatment, which result in the increase of micro-plastic deformation resistance. With the increasing of aging temperature, aging precipitation behaviour of ZL114A alloy transforms from precipitation of GP zone and β' phases simultaneously at lower temperature to precipitation of stable Mg₂Si phases at higher temperature. Because coherent strengthening is the main strengthen mechanism for micro-plastic deformation, precipitation of stable Mg₂Si phases is unfavorable to the improvement of micro-plastic deformation resistance. Micro-yield strength cannot characterize dimensional stability comprehensively, and dynamic dimensional stability under alternative temperature should also be tested cooperatively for better evaluation of dimensional stability.