• 中文主题词：建筑 ; 施工材料 ; 调查方法 ; 调查 ; 天然石料 ; 岩石 ; 抽样方法 ; 土壤 ; 石 ; 井
• 标准号：ASTM D1452-2007a
• 发布日期：2007
• 英文题名：Standard Practice for Soil Investigation and Sampling by Auger Borings
• 英文主题词：auger borings ; sampling ; soil investigations
• 标准状态：现行
• 发布单位：US-ASTM
• 国际标准分类号：93.020 (Earth works. Excavations. Foundation construction. Underground works)
• 载体形态：4P.;A4
• 中国标准分类号：P13
• 国别：美国材料与试验协会

Auger borings often provide the simplest method of soil investigation and sampling. They may be used for any purpose where disturbed samples can be used and are valuable in connection with ground water level determination and indication of changes in strata and advancement of hole for spoon and tube sampling. Equipment required is simple and readily available. Depths of auger investigations are, however, limited by ground water conditions, soil characteristics, and the equipment used.

1.1 This practice covers equipment and procedures for the use of earth augers in shallow geotechnical exploration. This practice does not apply to sectional continuous flight augers.

1.2 The values stated in inch-pound units are to be regarded as the standard. The SI values given in parentheses are provided for informational purposes only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.3 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project''s many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM concensus process.