自动武器闭锁机构三维装配精度分析技术研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research on Assembly Precision Analysis Technology for Locking Mechanism of Automatic Weapon Based on 3D Model 作者：常方圆 ; 方峻 ; 罗少敏 英文作者：CHANG Fang-yuan;FANG Jun;LUO Shao-min;School of Mechanical Engineering,Nanjing University of Science and Technology; 关键词：闭锁机构 ; 装配精度 ; 小位移旋量 ; 公差分析 英文关键词：Locking Mechanism;;Assembly Precision;;SDT;;Tolerance Analysis 中文刊名：JSYZ 英文刊名：Machinery Design & Manufacture 机构：南京理工大学机械工程学院; 出版日期：2018-03-08 出版单位：机械设计与制造 年：2018 期：No.325 基金：国防基础科研项目(A1020131011) 语种：中文; 页：JSYZ201803075 页数：5 CN：03 ISSN：21-1140/TH 分类号：261-265

摘要

闭锁机构是自动武器的主要工作机构,其装配质量对武器发射可靠性与使用安全有较大影响。目前,自动武器产品的公差分析仍使用传统的线性尺寸链计算方法,而忽视了特征变动和配合间隙对装配质量的影响。通过三维偏差分析技术对闭锁机构装配精度进行预测,提出了特征要素离散化处理的方法,采用矢量坐标矩阵来描述几何特征要素在空间中的位置变动,通过蒙特卡洛模拟法随机抽样进行仿真试验,模拟实际表面的偏移。分析满足约束条件的随机数样本,求解装配偏差累积模型,得到了与实际装配情况一致的结果。通过实例对比分析了尺寸链计算、旋量矩阵法和软件仿真三种方法的特点,验证了该方法的有效性,为自动武器设计制造集成应用的实施提供了参考。
        Locking mechanism isimportant working parts of automatic weaponand its assembly quality has great influence on the reliability and safety of weapon launch.At present,the calculation method of tolerance analysis of automatic weapons products are still using the traditional linear dimension,while ignoring the impact of variations and clearance on assembly quality. The accuracy of the locking mechanism assembly is predicted by three dimensional tolerance analysismethod. Put forward the method of the characteristic surface discretization,using vector coordinate matrix to describe the position change of geometric featurein space,using Monte Carlo method for random sampling to simulate the deviation of the actual tolerance surface. Analysis of the random number of samples to meet the constraint conditions for solving assembly cumulative deviation.And the results obtained are consistent with the practical conditions.By contrastive analysis three methods of the calculating dimension chain,matrix method and the simulation software to shows the validity of this method. Provide a reference for promoting the implementation of digital assembly of automatic weapons.

引文

[1]罗少敏,王亚平,邹衍.某型手枪击发机构装配公差分析与信息化集成研究[J].机械设计与制造,2014(28612):132-136.(Luo Shao-min,Wang Ya-ping,Zou Yan.Research on assembly tolerance for firing mechanism of a pistoland solutions for information integration[J].Machinery Design and Manufacture,2014(28612):132-136.)
    [2]Hillyard R.C.Characterizing non-ideal shapes in termsof dimensionsan tolerances[J].Computer Graphics,1983,12(3):234-238.
    [3]Turner,J.U.A.Feasibility space approach for automated tolerancing[J].Journal of Engineering for Industry,1993,115(3):325-341.
    [4]MMarziale,WPolini.A review of two models for tolerance analysis of an assembly:vector loop and matrix[J].International Journal of Advanced Manufacturing Technology,2009,43(11):1106-1123.
    [5]吴昭同,杨将新.计算机辅助公差优化设计[M].杭州:浙江大学出版社,1999:3-9.(Wu Zhao-tong,Yang Jiang-xin.Computer Aided Tolerance Optimization Design[M].Hangzhou:Zhejiang University Press,1999:3-9.)
    [6]刘玉生,杨将新,吴昭同.基于数学定义的平面尺寸公差数学模型[J].机械工程学报,2001,37(9):12-17.(Liu Yu-sheng,Yang Jiang-xin,Wu Zhao-tong.Mathematical model of size tolerance for plane based on mathematical definition[J].Chinese Journal of Mechanical Engineering,2001,37(9):12-17.)
    [7]胡洁,吴昭同,杨将新.基于旋量参数的三维公差累积的运动学模型[J].中国机械工程,2003(2):43-46.(Hu Jie,Wu Zhao-tong,Yang Jiang-xin.Kinematics model of 3D tolerance accumulation based on screw parameter[J].China Mechanical Engineering,2003(2):43-46.)
    [8]Bourdet.A study of optimal-criteria identification based on the small displacement screw model[J].Annals of the CIRP,1998(37):503-506.