多层抗弯钢框架的结构影响系数
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
结构的地震作用取值与结构的延性和超强有关,结构的延性和超强可用结构影响系数来反映。我国现行抗震设计规范对不同材料的所有结构体系采用单一的结构影响系数,不尽合理。文章针对三个不同的抗弯钢框架,采用Pushover分析方法,得出了多层抗弯钢框架的结构影响系数,可供工程设计人员参考。
The structural earthquake action value is correlated with the structural overstrength,structural ductility and overstrength can be reflected by the structural influencing coefficient.It is unreasonable that the single structural influencing coefficient is nowadays adopted by currently code for seismic design of buildings in all structural systems built by different materials in our country.In this paper,three examples are presented to get the structural influencing coefficient by Pushover analytical method,which can be of some reference for designers.
引文
[1]GB50011-2001,建筑抗震设计规范[S].
    [2]顾强,何若全,苏明周.关于钢结构地震作用的讨论[J].苏州科技学院学报:工程技术版,2005,18(2):1-5.
    [3]Chia-Ming Uang.Establishing R(or Rw)and Cd factors for building seismic provisions[J].Journal of Structural Engineering,1991,117(1):19-28.
    [4]Chia-Ming Uang,Ahmed Maarouf.Deflection Amplification factor for seismic design provisions[J].Journal of Structural Engineering,1994,120(8):2423-2436.
    [5]何若全,顾强,孙国华.关于钢结构抗震设计中结构影响系数的讨论[J].苏州科技学院学报:工程技术版,2004,17(4):29-32.
    [6]CECS160:2004,建筑工程抗震性态设计通则(试用)[S].
    [7]刘大海,杨翠如.建筑抗震设计的新概念——对《建筑工程抗震性态设计通则》的理解[J].建筑结构,2006,36(1):89-95.
    [8]张金海.钢结构地震作用取值的建议与分析[D].哈尔滨:哈尔滨工业大学,2005.
    [9]Yong Lu,Hong Hao,P G Carydis,et al.Seismic performance of RC Frames designed for three different ductility levels[J].Engineering Structures,2001,23:537-547.
    [10]包头钢铁设计研究总院,中国钢结构协会房屋建筑钢结构协会.钢结构设计与计算[M].2版.北京:机械工业出版社,2006.
    [11]翟长海.最不利设计地震作用及强度折减系数的研究[D].哈尔滨:哈尔滨工业大学,2004.
    [12]谭娟,王树和.浅谈地震工程中的模态pushover分析方法[J].山西建筑,2006,32(3):63-65.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心