用户名: 密码: 验证码:
激发波长对甲醇在二氧化钛(110)表面光催化氧化效率的影响
详细信息    查看官网全文
摘要
我们使用程序升温脱附谱研究了三种不同波长(360、380及400 nm)激光照射后甲醇在金红石型二氧化钛(110)表面上的光催化氧化反应。在三种情况下甲醇均被氧化为甲醛,失去的氢与表面二配位氧结合形成桥羟基。我们发现在这一反应中,反应速率与入射波长有关。入射波长为360nm时,其反应速率为400nm时的4.8倍。这一结果与之前的报道相符。造成这一现象的原因尚不明确,有待进一步研究。
Post-irradiation temperature-programmed desorption(TPD) has been used to study the photo catalyzed oxidation of methanol on TiO 2(110) surface under the irradiation of 360, 380 and 400 nm light. The photocatalytic process initiated by ultraviolet light of different wavelength are similar. Methanol has been photo catalytically converted into formaldehyde, and the released hydrogen atoms transfer to the neighboring twofold coordinated oxygen to form bridging hydroxyls. The reaction rate, however, is strongly wavelength dependent. The reaction rate under 360 nm light irradiation is 4.8 times of that in the case of 400 nm exposure. So far, the mechanism remains unclear, and future studies are needed to address this important issue.
引文
[1]Wang,Z.Q.;Hao,Q.Q.;Zhou,C.Y.;Dai,D.X.;Yang,X.M.Chin.J.Chem.Phys.2015,28(4):459.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700