基于微纳乳液的Inconel718电火花成形加工工艺实验研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Experimental Study on Sinking Electro-discharge Machining Process of Inconel718 Using Micro-nano Emulsion 作者：王晓龙 ; 张昆 ; 申泱 英文作者：WANG Xiaolong;ZHANG Kun;SHEN Yang;Dongying Science and Technology Bureau;Capital Aerospace Machinery Co., Ltd.; 关键词：电火花成形加工 ; 微纳乳液 ; Inconel718 ; 表面粗糙度 英文关键词：SEDM;;micro-nano emulsion;;Inconel718;;surface roughness 中文刊名：DJGU 英文刊名：Electromachining & Mould 机构：东营市科学技术局;首都航天机械有限公司; 出版日期：2019-02-20 出版单位：电加工与模具 年：2019 期：No.344 语种：中文; 页：DJGU201901006 页数：5 CN：01 ISSN：32-1589/TH 分类号：20-23+77

摘要

采用自制的微纳乳液作为工作液,利用电火花成形加工镍基高温合金(Inconel718),选取峰值电流、脉冲宽度、脉冲间隔及单次加工时间等参数进行十字正交试验,研究分析这些参数对电火花成形加工Inconel718的表面粗糙度和材料去除率的影响,并对比了在微纳乳液与煤油工作液中加工的工件表面微观形貌。结果表明:峰值电流对材料去除率影响显著,单次加工时间对表面粗糙度影响显著;与煤油工作液相比,采用微纳乳液进行电火花成形加工的工件表面质量更好。
        Using self-made micro-nano emulsion as working fluid,the nickel-based superalloy(Inconel718) was processed by sinking electro-discharge machining(SEDM) technology under the parameters such as peak current,pulse width,pulse interval and single machining time which were selected for orthogonal test in this article. The effects of the parameters on surface roughness and material removal rate of Inconel718 on SEDM were analyzed,and the surface topography of workpieces machining in micro-nano emulsion and kerosene working fluid were compared subsequently. The results show that the peak current and single machining time get significant effects on the material removal rate and the surface roughness,respectively. Compared with the kerosene working fluid,the surface quality of the workpieces treated by micro-nano emulsion for SEDM is better.

引文

[1]王会阳,安云岐,李承宇,等.镍基高温合金材料的研究进展[J].材料导报,2011,25(18):482-486.
    [2]LI L,GUO Y B,WEI X T,et al.Surface integrity characteristics in wire-EDM of Inconel 718 at different discharge energy[J].Procedia CIRP,2013,6:220-225.
    [3]张永忠,石力开,章萍芝,等.激光快速成形镍基高温合金研究[J].航空材料学报,2002,22(1):22-25.
    [4]王华明.金属材料激光表面改性与高性能金属零件激光快速成形技术研究进展[J].航空学报,2002,23(5):473-478.
    [5]余乾,肖程波,宋尽霞,等.熔体处理时间对铸态镍基高温合金K465组织和力学性能的影响[J].航空材料学报,2005,25(1):1-4.
    [6]李青,宋尽霞,肖程波,等.熔体过热处理对一种新型镍基高温模具合金组织和性能的影响[J].动力与能源用高温结构材料-第十一届中国高温合金年会论文集,2007:376-379.
    [7]王震,李金国,金涛.熔体过热处理对DD98镍基单晶高温合金持久性能的影响[J].金属热处理,2012,37(4):48-51.