基于SolidWorks Motion的反求凸轮连杆组合机构模型研究

详细信息    查看全文 | 推荐本文 |

	英文篇名：Research on Reverse of Cam-Link Combined Mechanism Model Based on SolidWorks Motion 作者：孙健 英文作者：Sun Jian;Jianghai Polytechnic College; 关键词：SolidWorks ; Motion ; 反求工程 ; 凸轮 ; 运动仿真 英文关键词：SolidWorks Motion;;Reverse engineering;;Cam;;Motion simulation 中文刊名：DDGJ 英文刊名：Electric Tool 机构：江海职业技术学院; 出版日期：2019-04-18 出版单位：电动工具 年：2019 期：No.202 语种：中文; 页：DDGJ201902006 页数：4 CN：02 ISSN：31-1433/TM 分类号：16-19

摘要

按照给定运动轨迹反求零件实际模型是现代机构设计的一种方法。采用SolidWorks Motion完成反求凸轮连杆组合机构模型的研究,反求凸轮轮廓,通过运动仿真验证机构实际运动轨迹与给定运动轨迹相符,得出SolidWorks Motion反求凸轮连杆组合机构模型方法相对于传统方法更具优势。
        It is a common method of modern mechanism design to reverse the actual model of parts according to the given trajectory. Solid Works Motion is used to complete the research on reverse of cam-link combined mechanism model, which reverses out cam profile and verifies that the actual trajectory of the mechanism is consistent with the given trajectory by way of motion simulation.Finally, it is concluded that the method of reverse of cam-link combined mechanism model by SolidWorks Motion has more advantages than the traditional method.

引文

[1]张晋西,郭学琴. SolidWorks及COSMOSMotion机械仿真设计[M].北京:清华大学出版社,2006.
    [2]李大磊,丁天涛.基于SolidWorks Motion的空间摆动机构的运动分析[J].制造业自动化,2011(11下):70-71.
    [3]吕钦松.SolidWorks Motion在千斤顶设计中的应用[J].新技术新工艺,2014(3):48-50.