局部SRC二次转换结构受力性能研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Study on the mechanical performance of local SRC secondary transfer structures 作者：邓智元 ; 陈思坚 英文作者：DENG Zhiyuan;CHEN Sijian;School of Civil Engineering,Fujian University of Technology;Fujian Provincial Key Laboratory of Advanced Technology and Informatization in Civil Engineering; 关键词：二次转换 ; 局部SRC转换梁 ; 应力集中 ; 扭转效应 英文关键词：secondary transfer;;local SRC transfer beam;;stress concentration;;torsion effect 中文刊名：JZGZ 英文刊名：Journal of Fujian University of Technology 机构：福建工程学院土木工程学院;福建省土木工程新技术与信息化重点实验室; 出版日期：2019-06-25 出版单位：福建工程学院学报 年：2019 期：v.17;No.98 语种：中文; 页：JZGZ201903003 页数：5 CN：03 ISSN：35-1267/Z 分类号：18-22

摘要

提出在主次梁交接处至支座处加设型钢,形成局部型钢混凝土(steel reinforced concrete,SRC)二次转换结构。采用有限元法研究不同剪跨比下局部SRC二次转换结构的抗剪、抗扭、缓解应力集中能力,并与SRC二次转换结构、钢筋混凝土(reinforced concrete,RC)二次转换结构进行受力性能比较。结果表明:局部SRC二次转换结构能明显缓解应力集中和扭转效应不利因素,当剪跨比为0.65～1.90时,其抗扭、抗剪效果最佳。
        A secondary transfer structure was proposed,which added section steel at the junction of orthogonal and secondary beams to the bearing,making up local SRC secondary transfer structures. Finite element method( FEM) was used to study the shear resistance,torsion resistance and stress concentration relief ability of the local SRC secondary transfer structures under different shear span ratios. These mechanical properties were compared with those of SRC secondary transfer structures and reinforced concrete's secondary transfer structures. Results show that local SRC secondary transfer structures can effectively relieve the stress concentration and the torsion effect,and their torsion resistance and shear resistance effects are the best when the shear span ratio falls in the range of 0.65 ～ 1.90.

引文

[1]施嘉奇.落地剪力墙对带梁式转换层的框支剪力墙结构抗震性能影响分析[D].合肥:合肥工业大学,2018.
    [2]金雪峰,于彦召,黄春杏,等.某超限高层住宅型钢混凝土框架转换结构设计[J].建筑结构,2019,49(5):90-95.
    [3]住房和城市建设部.高层建筑混凝土结构技术规程:JGJ3-2010[S].北京:中国建筑工业出版社,2011.
    [4]雷静.带主次梁转换层框支剪力墙结构计算分析[D].西安:长安大学,2006.
    [5]马斐.基于体系能力设计法的某高位转换超限结构抗震性能设计[J].建筑结构,2018,48(5):54-60.
    [6]LONDHE R S.Shear capacity of reinforced concrete transfer beams reinforced with longitudinal steel[J].Journal of Structural Engineer,2008,35:190-194.
    [7]LI J H,SU R K L,CHANDLER A M.Assessment of low-rise building with transfer beam under seismic forces[J].Engineering Structures,2003,25(12):1537-1549.
    [8]关立军,张伟.复杂框支转换结构抗震计算分析[J].建筑结构,2009,18(2):9-18.
    [9]王婧奇.型钢混凝土抗扭构件非线性有限元分析[D].桂林:桂林理工大学,2010.
    [10]李国强,崔大光,李一松.型钢混凝土梁柱框支剪力墙结构抗震性能试验研究[J].地震工程与工程振动,2006,26(2):80-87.
    [11]陆婷婷,梁兴文,胡翱翔,等.翼缘宽度对预期损伤部位采用FRC增强的梁柱组合件破坏机制影响的试验研究及数值模拟[J].土木工程学报,2016,49(12):52-64.