摘要
为提高黑龙江某矿Cu、Mo的精矿品位和回收率,基于现有工艺流程,开展磨矿细度和分选药剂条件实验,确定Mo精选再磨细度及分选药剂方案,优化分选工艺。优化工艺流程中,Mo精选再磨Ⅱ阶段磨矿细度调整为-0.038 mm粒级占85%;黄铜矿抑制剂选用BK510+P-Nokes组合药剂,用量分别为10和60 g/t;黄铜矿捕收剂选用Z-200,用量为0.6 g/t。现场验证实验结果表明:Mo精矿品位为52.28%,回收率为90.12%,回收率提高了2.94%;Cu精矿品位为21.78%,回收率为52.78%,回收率提高了17.50%。该结果与闭路实验结果相近,验证了优化工艺的分选效果。
This paper seeks to improve the concentrate grade and recovery rate of Cu-Mo sulfide ore in Heilongjiang province. The research involves using the existing production process to perform experiments on grinding fineness and sorting chemicals condition; and determining grinding size in regrinding of molybdenum concentrate and optimizing separation process. Optimizing the process involves adjusting Mo regrinding II stage grinding fineness to-0. 038 mm particle size,accounting for 85%; employing BK510 +P-Nokes combination agent as chalcopyrite inhibitor,with the dosage of 10 and 60 g/t respectively; and selecting Z-200 as chalcopyrite collector,with the dosage of 0. 6 g/t. Field verification experiments demonstrate that the optimized process could enable the molybdenum concentrate grade of 52. 28%; the recovery rate of 90. 12%,a 2. 94% increase; copper concentrate grade of 21. 78%; and the recovery rate of 52. 78%,a 17. 50% increase. The results from the model are close to the experimental results,verifying the separation efficiency of the optimized process.
引文
[1]黄卉,陈福亮,姜艳,等.我国钼资源现状及钼的冶炼分析[J].云南冶金,2015,43(2):66-70.
[2]王昊伟.云南香格里拉铜钼矿选矿试验研究[D].昆明:昆明理工大学,2017.
[3]孟奇,崔毅琦,童雄,等.铜钼分离技术现状与趋势[J].矿冶,2014,23(2):19-21.
[4]张文钲.铜钼分离的新方法[J].钼业经济技术,1987(3):48-56.
[5]符剑刚,钟宏,欧乐明.巯基乙酸在铜钼分离中的应用[J].矿产保护与利用,2002,22(4):38-41.
[6]龚明光.泡沫浮选[M].北京:冶金工业出版社,2007.
[7]缑明亮,武俊杰,崔长征,等.辉钼矿选矿药剂及选矿工艺研究[J].有色金属(选矿部分),2013(3):74-77.
[8]李琳,吕宪俊,栗鹏.钼矿选矿工艺发展现状[J].中国矿业,2012,21(2):99-103.