摘要
采用Lix984N—煤油—H2SO4萃取体系,从粗硫酸镍溶液中选择性回收铜,研究了初始pH值、萃取剂体积分数、相比O/A等对铜萃取的影响。结果表明,在初始pH值为2.4、萃取剂体积分数为25%、相比O/A为1∶1的条件下,经一级萃取即可获得铜萃取率为98.19%,镍萃取率仅为0.68%的良好指标。以H2SO4浓度为180 g/L溶液作反萃剂,在相比O/A为1∶1条件下经一级反萃,铜的反萃率为99.05%。铜以CuSO4溶液的形式回收,可以作为制备硫酸铜晶体或电积制备电解铜的原料。
Copper was selectively recovered from crude nickel sulphate solution by extraction system of Lix984 N-Kerosene-H2 SO4. The effects of initial pH value,Lix984 N volume fraction and phase ratio O/A on selective extraction of copper were studied. The results show that single-stage extraction at initial pH of 2.4,volume concentration of the extractant is 25%and phase ratio(O/A)of 1∶1, the extraction rate of copper is up to 98.19% and the extraction rate of nickel only at 0.68%. After that, a single-stage stripping with 180 g/L sulfuric acid and phase ratio of 1∶1 resulted in the stripping rate of copper up to99.05%. Copper is recovered in the form of CuSO4 solution and can be used as raw material for preparation of copper sulfate crystals or electrowinning of electrolytic copper.
引文
[1]邬建辉,董波,张献鹏,等.选择性沉淀法从粗硫酸镍溶液中回收铜[J].矿冶工程,2018,38(2):88-90.Wu Jianhui,Dong Bo,Zhang Xianpeng,et al.Selective precipitation of copper from crude nickel sulphate solution[J].Mining and Metallurgical Engineering,2018,38(2):88-90.
[2]邬建辉,董波,张献鹏,等.用P507从硫酸镍溶液中萃取分离铜、锌、钴[J].有色金属科学与工程,2018,9(2):19-24.Wu Jianhui,Dong Bo,Zhang Xianpeng,et al.Solvent extraction of Cu,Zn,Co from nickel sulphate solution applying P507[J].Nonferrous Metals Science and Engineering,2018,9(2):19-24.
[3]吴展,陈志友,侯琼英,等.从粗硫酸镍溶液中净化分离铁砷试验研究[J].湿法冶金,2013,32(2):122-124.Wu Zhan,Chen Zhiyou,Hou Qiongying,et al.Research on removal of arsenic and iron from crude nickel sulphate solution[J].Hydrometallurgy of China,2013,32(2):122-124.
[4]李伟,吴展,郭学益.粗硫酸镍溶液净化除杂试验研究[J].湿法冶金,2015,34(1):72-75.Li Wei,Wu Zhan,Guo Xueyi.Purification of crude nickel sul-phate solution from copper electrorefining[J].Hydrometallurgy of China,2015,34(1):72-75.
[5]吴展,李伟,陈志华,等.高效萃取剂AD100从粗硫酸镍溶液中回收铜的研究[J].矿冶工程,2013,33(2):105-107.Wu Zhan,Li Wei,Chen Zhihua,et al.Study on recovering copper from crude nickel sulphate solution with high efficient extractant AD100[J].Mining and Metallurgical Engineering,2013,33(2):105-107.
[6]吴芳,吕军.铜萃取剂M5640从硫酸镍溶液中分离铜的应用研究[J].五邑大学学报:自然科学版,2004,18(1):25-27.Wu Fang,Lu Jun.Study on separation of Cu2+from nickle sulphate solution with extractant M5640[J].Journal of Wuyi University:Natural Science Edition,2004,18(1):25-27.
[7]李凡,朱军,白苗苗,等.用溶剂萃取法从硫酸镍溶液中去除钙、铁[J].湿法冶金,2016,35(2):132-135.Li Fan,Zhu Jun,Bai Miaomia,et al.Removal of calcium and iron from nickle sulphate solution by solvent extraction[J].Hydrometal-lurgy of China,2016,35(2):132-135.
[8]王亚秦,付海阔.工业硫酸镍生产技术进展[J].化工进展,2015,34(8):3085-3092.Wang Yaqin,Fu Haikuo.Progresses in the preparation technologies of nickel sulfate for industrial use[J].Chemical Industry and Engineering Progress,2015,34(8):3085-3092.
[9]刘晓荣,邱冠周,胡岳华.Lix984N的降解行为研究[J].矿冶工程,2002,22(3):79-82.Liu Xiaorong,Qiu Guanzhou,Hu Yuehua.The study on degradation of Lix984N[J].Mining and Metallurgical Engineering,2002,22(3):79-82.
[10]彭钦华,陈述一,李绍民,等.铜萃取剂BK992和LIX984的性能研究[J].有色金属:冶炼部分,2002(5):18-20.Peng Qinhua,Chen Shuyi,Li Shaomin,et al.Properties study on copper Extractant BK992 and LIX984[J].Non-ferrous Metals:Extractive Mefallurgy,2002(5):18-20.