摘要
莞惠铁路为ATO系统在城际铁路上的首次应用,其中的动车组车门与屏蔽门具备了联动功能。本文结合莞惠铁路的设计实例,对信号系统与屏蔽门系统的相关控制原理、接口电路进行分析研究,针对城际铁路CTCS2+ATO信号系统及地铁中CBTC信号系统与屏蔽门接口设计的不同之处进行讨论,并对运营过程中屏蔽门系统出现的相关问题,提出了合理可行的解决方案。
The ATO system in Dongguan-Huizhou railway is the first application of the ATO system in intercity railway with linkage control function of the train door and the platform screen door.Base on the design case in Dongguan-Huizhou railway,related control principle and interface circuit between the signaling system and the platform screen door system are analyzed.The differences between the design of the C2+ATO signal system'interface with the screen door system in intercity railway and that of the CBTC signal system with the screen door system in metro are discussed.In addition,proper and feasible solution to deal with related problems of the screen door system occurring during operation is proposed.
引文
[1]陈建译.珠三角城际铁路CTCS2+ATO系统与站台门接口研究[J].铁道通信信号,2016(52):2-3.
[2]文小伟.珠三角城际铁路CTCS2+ATO技术方案中难点问题的解决[J].铁道通信信号,2014,(50):66.
[3]李鹏.莞惠城际信号系统特殊继电器设置及处理逻辑探讨[J].铁路通信信号工程技术,2016,(13):86-87.
[4]王珩.浅谈地铁屏蔽门电气控制系统[J].地铁与轻轨,2003(5).
[5]朱发林.广佛线信号系统与屏蔽门系统接口分析[J].铁道通信信号,2012,(48):10.