风腔厚度对强迫风冷系统散热性能的影响

详细信息    查看全文 | 推荐本文 |

英文篇名：Effect of Wind Cavity Thickness on the Efficiency of Forced Air Cooling System 作者：刘巍 ; 程林 英文作者：LIU Wei;CHENG Lin;The 38th Research Institute of China Electronics Technology Group Corporation; 关键词：雷达 ; 强迫风冷 ; 风腔 ; 热设计 英文关键词：radar;;forced air cooling;;wind cavity;;thermal design 中文刊名：LDKJ 英文刊名：Radar Science and Technology 机构：中国电子科技集团公司第三十八研究所; 出版日期：2017-04-15 出版单位：雷达科学与技术 年：2017 期：v.15 语种：中文; 页：LDKJ201702020 页数：4 CN：02 ISSN：34-1264/TN 分类号：115-118

摘要

以某雷达天线单元为研究对象,采用Icepak热仿真软件,研究了风腔厚度对强迫风冷系统散热性能的影响。结果表明:风腔厚度对风冷系统的散热性能有明显影响;保持风机型号和散热器结构不变,当风腔厚度过小时,风机的性能受到明显抑制;随着风腔厚度的增加,风机的性能会变好,发热元件的温度明显降低;当风腔厚度达到一定值后再继续增加时,风机的性能反而会下降,发热元件的温度也相应升高。在工程设计中,推荐此类风冷散热结构的风腔厚度取值不小于16mm,不大于40mm。
        In this paper,the effect of wind cavity thickness on the efficiency of forced air cooling system in the radar antenna is researched by the thermal simulation software of the Icepak.The results show that the thickness of wind cavity has obvious effect on the forced air cooling system.When the model of the fan and the structure of heat radiator are certain,the efficiency of the fan is decreased when the thickness of wind cavity is small;while the thickness of wind cavity is increased,the efficiency of the fan is improved observably,and the temperatures of thermal elements are decreased at the same time.When the thickness is more than a certain value,on the contrary,the efficiency of the fan is decreased,and the temperatures of thermal elements are increased accordingly.In the engineering design,the value of wind cavity thickness is suggested to be more than 16 mm and less than 40 mm.

引文

[1]张小军,田珂.间接强迫风冷机箱的热设计与仿真[J].科技创新与应用,2012(32):39-40.
    [2]宋志行,关宏山,钱海涛,等.机载有源相控阵天线的结构设计[J].雷达科学与技术,2005,3(3):189-192.
    [3]郭欣茹,张亚峰.电子设备机箱的强迫风冷设计[J].无线电通信技术,2004,30(2):49-50.
    [4]张学新.某地面电子设备的热设计[J].电子机械工程,2014,30(4):8-11.
    [5]刘巍,张先锋,关宏山.雷达电子设备通风口结构对风机性能的影响[J].电子机械工程,2015,31(4):9-11.