飞利浦Brilliance 16排CT故障分析与维修

详细信息    查看全文 | 推荐本文 |

英文篇名：Philips Brilliance 16 Row CT Failure Analysis and Maintenance 作者：徐旭 ; 陈曦 英文作者：XU Xu;CHEN Xi;Department of Equipment, Xuzhou First People's Hospital;Xuzhou Metrological Verification Test Center; 关键词：Brilliance ; 16排CT ; 报错代码 ; 旋转机架 ; R2D控制板 ; 控制电路 ; 滑动丝杆 ; 设备维修 英文关键词：brilliance 16 row CT;;error code;;rotating frame;;R2D control board;;control circuit;;slide rod;;equipment maintenance 中文刊名：YLSX 英文刊名：China Medical Devices 机构：徐州市第一人民医院设备科;徐州市计量检定测试中心; 出版日期：2018-07-10 出版单位：中国医疗设备 年：2018 期：v.33 语种：中文; 页：YLSX201807030 页数：3 CN：07 ISSN：11-5655/R 分类号：105-106+124

摘要

本文首先对飞利浦Brilliance 16排CT简单介绍及工作原理的阐述。接着分析了飞利浦Brilliance 16排CT在开机扫描10余名的患者后,机器操作界面显示连续出现3例故障报错代码:"Gantry cannot comply,please try again""Patient table cannot comply,please retry""Tilt system cannot comply,please retry",机器重启后仍出现该故障的现象。最终通过更换R2D板后进一步解决此类报错故障现象。由于该故障属于环套式故障,需要工程师根据实际的维修经验及报错代码逐项判断,分项解决。通过此次维修的过程,望给临床维修工程师在维修过程中提供一定的帮助。
        First of all, brief introduction and working principle of philips Brilliance 16 row CT were introduced in the present paper. Then, three consecutive of the philips Brilliance 16 row CT computed tomography that showed on the machine operation interface after more than 10 patients boot scanning were analyzed. The failure codes which including "Gantry can't comply please try again""Patient table cannot comply, please retry" and "Tilt system cannot comply, please retry". These faults still occured after the machine was restarted. Finally, the failures were solved by replacing the R2 D board. Because the faults belonged to the ring type fault, it was necessary for the engineer to judge according to the actual maintenance experience and error code, and solve the problem. Through the process of this repair, we hope to provide some assistance to the clinical maintenance engineers during the maintenance.

引文

[1]陈少云.飞利浦Brilliance16排CT故障检修[J].临床医学工程杂志,2011,18(8):1312-1315.
    [2]余华良.飞利浦Brilliance16排CT常见故障和解决方案[J].医疗装备,2010,23(5):63-64.
    [3]李桂阳.飞利浦Brilliance16排CT的工作原理和故障分析[J].中国医疗设备,2013,28(11):135-136.
    [4]夏诚,王新.飞利浦Brilliance系列CT机启动电路的原理及常见故障分析[J].中国医疗设备,2011,26(10):132-133.
    [5]马杰,张民.螺旋CT机的维护和检修探讨[J].CT理论与应用研究,2011,20(1):123-129.
    [6]陈晓阳,翟健坤.PHILIPS Brilliance16排螺旋CT机的养护管理与故障分析[J].中外医疗,2012,31(13):10.
    [7]蒋友好.C T故障的分析与预防措施[J].中国医疗器械杂志,2011,18(8):1312-1315.
    [8]林建斌.飞利浦Brilliance16排CT故障分析与处理[J].中国医疗设备,2015,5:162-163.
    [9]许银伍,苏家贵,田梅.飞利浦Brilliance 16排CT故障维修三例[J].中国医疗设备,2009,24(11):96.
    [10]剡婷,凌海波,蔡永前.飞利浦16排Brilliance CT Big Bore常见故障分析与检修三例[J].中国医疗设备,2017,32(10):100-101.
    [11]王宝华.CT设备使用经验浅议[J].医疗装备,2010,23(5):9-12.
    [12]于江,苏勤.东芝Aquilion16层螺旋CT机故障检修三例[J].医疗装备,2009,22(1):59.
    [13]孙四佳,佟知拥.Brilliance256层螺旋极速CT和16排CT故障维修[J].中国医疗设备,2016,31(8):161.
    [14]韩丰谈,朱险峰.医学影像设备学[M].北京:人民卫生出版社,2014.
    [15]杜丽春.CT故障产生的原因及检修方法[J].实用医学影像杂志,2007,(8):57-59.
    [16]盛存义.浅谈G E螺旋C T故障的分析及维修[J].北方药学,2011,8(8):104.
    [17]罗可欣,李德勇,刘明.GE Light Speed CT故障维修5例[J].医学影像学杂志,2010,20(7):1075-1076.
    [18]邱春冬,成刚.GE Lightspeed VCT故障4例[J].中国医疗设备,2016,31(4):161-162.