摘要
A/O活性污泥法是炼油厂污水生化处理常用工艺,由于受来水水量和水质变化的冲击,会造成活性污泥膨胀,影响污水处理场的正常运行。针对某炼油厂污水处理场几次活性污泥膨胀的过程,分析产生原因,采取措施,并提出改进污水处理场的运行建议。
A/O activated sludge process is a common process of sewage biochemical treatment in refineries.The impact of water quality and quantity will cause sludge bulking and affect the normal operation of sewage treatment works. According to the process of several times of activated sludge bulking in a sewage treatment works of a refinery, the causes were analyzed with the countermeasures adopted; more than that, some suggestions about sewage treatment works operation improvement were pointed out.
引文
[1]李宗仁,张新颖,林琳琳,等.污泥膨胀与生物泡沫的形成机理和控制方法[J].净水技术, 2018, 37(4):28-33.
[2]王磊.污泥膨胀产生的原因及主要控制措施[J].环境科学与管理, 2011, 36(2):65-67.
[3]范举红,周爱姣,陶涛,等. A2/O工艺中泡沫的成因分析及控制措施[J].工业用水与废水, 2008, 39(5):53-55.
[4]郝二成,袁星,阜崴.污泥膨胀原因及控制措施研究[J].环境工程, 2017, 35(7):18-22.
[5]高春娣,孙大阳,安冉,等.间歇曝气下短程硝化耦合污泥微膨胀稳定性[J].环境科学, 2018, 39(7):1-14.
[6]郭旋,刘俊新.曝气时间对活性污泥絮体吸附和聚集性能的影响[J].工业用水与废水, 2016, 47(4):22-28.