摘要
污水处理行业快速地由污水处理模式向资源回收模式转变,活性污泥模型(ASMs)应运而生。本文首先概括了污水厂模型建立的一般步骤;然后结合国内外工程实例介绍了ASMs的发展过程;最后阐述了ASMs模拟污水处理厂运行的重大意义,并对研究的发展方向进行了展望。
The sewage treatment industry has rapidly changed from a sewage treatment mode to a resource recovery model, and activated sludge models(ASMs) have emerged. This paper first summarizes the general steps of the establishment of the wastewater treatment plant model; then combined with domestic and foreign engineering examples to introduce the development process of ASMs; finally, the significance of ASMs simulating the operation of sewage treatment plants is explained, and the development direction of the research is prospected.
引文
[1]ELAWWAD A, ZAGHLOUL M, ABDEL-HALIM H. Simulation of municipal-industrial full scale WWTP in an arid climate by application of ASM3[J]. Journal of Water Reuse and Desalination, 2017,7(1):37-44.
[2]YAO-YU ZHANG J H A M. Simulation and Analysis of the Capacity of A2/O Wastewater Treatment Plant Based on ASM2D Model:2016 2nd International Conference on Sustainable Energy and Environmental Engineering, 2016[C].
[3]MACHADO V C, LAFUENTE J, BAEZA J A. Activated sludge model 2d calibration with full-scale WWTP data:comparing model parameter identifiability with influent and operational uncertainty[J].Bioprocess and Biosystems Engineering, 2014,37(7):1271-1287.
[4]DERCOJ,?ERNOCHOVáL,KRCHO=,etal.Dynamic simulations of waste water treatment plant operation[J]. Chemical Papers, 2011,65(6).
[5]De GUSSEM K, WAMBECQ T, ROELS J, et al. Cost optimisation and minimisation of the environmental impact through life cycle analysis of the waste water treatment plant of Bree(Belgium)[J].Water Science&Technology, 2011,63(1):164.
[6]FANG F, NI B, XIE W, et al. An integrated dynamic model for simulating a full-scale municipal wastewater treatment plant under fluctuating conditions[J]. Chemical Engineering Journal,2010,160(2):522-529.