硅溶胶粘结法制备氧化铝多孔陶瓷

详细信息    查看全文 | 推荐本文 |

英文篇名：Preparation of Porous Alumina Ceramics by Silica Solution Bonding Method 作者：姚森 ; 林洪玉 ; 曾小州 ; 庄艳红 ; 李晨雨 ; 黎阳 英文作者：YAO Sen;LIN Hongyu;ZENG Xiaozhou;ZHUANG Yanhong;LI Chenyu;LI Yang;School of Materials and Architectural Engineering,Guizhou Normal Universtiy; 关键词：硅溶胶 ; 氧化铝多孔陶瓷 ; 粘结剂 ; 二氧化硅 英文关键词：silica solution;;porous alumina ceramics;;binder;;silicon dioxide 中文刊名：TCXB 英文刊名：Journal of Ceramics 机构：贵州师范大学材料与建筑工程学院; 出版日期：2019-06-19 10:36 出版单位：陶瓷学报 年：2019 期：v.40 基金：贵州师范大学大学生创新训练项目(2018520158);贵州师范大学博士科研启动基金;; 贵州省教育厅自然科学研究项目(2015]363);; 国家自然科学基金项目(51462004) 语种：中文; 页：TCXB201903011 页数：5 CN：03 ISSN：36-1205/TS 分类号：57-61

摘要

以电熔Al_2O_3微粉为骨料、碱性硅溶胶为高温粘结剂、羧甲基纤维素为成型黏结剂,通过模压成型法制备了Al_2O_3多孔陶瓷,研究硅溶胶含量与烧成温度对Al_2O_3多孔陶瓷线收缩率、抗折强度、微观形貌、孔隙率等性能的影响。结果表明:随着硅溶胶含量的增加,烧成Al_2O_3多孔陶瓷的线收缩率逐渐增加,孔隙率逐渐降低,抗弯强度呈递增趋势。当硅溶胶含量占Al_2O_3粉体质量的5%-15%时,在1250℃-1350℃的烧成温度范围内,可获得具有优异孔隙率的Al_2O_3多孔陶瓷,其孔隙率为27.8%-40.1%;而当硅溶胶的含量达20%时,大量石英型SiO_2晶体的生成降低了Al_2O_3多孔陶瓷的力学性能与孔隙率。
        Porous alumina ceramics were prepared by molding method with fused alumina micron powder as aggregate,alkaline silica solution as high temperature binder and carboxymethycellulose as molding promoter.The effect of silica solution content and sintered temperature on linear shrinkage,flexural strength,microstructure and porosity of the porous ceramics were investigated.Results indicated that the linear shrinkage and flexural strength increased with silica solution content,while the porosity decreased.When the silica solution content was 5%-15%with the sintered temperature from 1250℃-1350℃,the porous ceramics had an excellent porosity,and the porosity was about27.8%-40.1%.When the silica solution surpassed 20%,the superabundant silica crystal derived from the solution degraded the flexural strength and porosity.

引文

[1]WU P,XU Y,HUANG Z,et al.A review of preparation techniques of porous ceramic membranes[J].Journal of Ceramic Processing Research,2015,16(1):102-106.
    [2]JUETTNER T,MOERTEL H,SVINKA V,et al.Structure of kaoline-alumina based foam ceramics for high temperature applications[J].Journal of the European Ceramic Society,2007,27(2):1435-1441.
    [3]AHMAD R,HA J H,SONG I H.Particle-stabilized ultra-low density zirconia toughened alumina foams[J].Journal of the European Ceramic Society,2013,33(13-14):2559-2564.
    [4]卢志华,李呈顺,马育栋.多孔氧化铝陶瓷制备技术研究进展[J].中国陶瓷,2018,54(02):1-7.LU Z H,LI C S,MA Y D.China Ceramics,2018,54(02):1-7.
    [5]贾元平,郭子瑜.氧化铝质多孔陶瓷制备工艺及应用[J].国外建材科技,2004,(05):29-31+39.JIA Y P,GUO Z Y.The World of Building Materials,2004,(05):29-31+39.
    [6]彭美华,程西云,周彪,等.CNTs-Al2O3多孔陶瓷复合材料的制备与性能[J].材料工程,2016,44(06):117-122.PENG M H,CHENG X Y,ZHOU B,et al.Journal of materials engineering.2016,44(06):117-122.
    [7]孙阳,徐鲲濠,孙加林,等.MgO烧结助剂对氧化铝多孔陶瓷结构和性能的影响[J].硅酸盐学报,2015,43(09):1255-1260.SUN Y,XU K H,SUN J L,et al.Journal of the Chinese Ceramic Society,2015,43(09):1255-1260.
    [8]诸华军,姚晓,华苏东,等.煅烧制度对偏高岭土胶凝活性的影响[J].非金属矿,2007,30(3):6-8.ZHU H J,YAO X,HUA S D,et al.Non-Metallic Mines,2007,30(3):6-8.
    [9]黎阳,张诚,李仕勇.聚碳硅烷粘结法低温制备碳化硅多孔陶瓷[J].中国陶瓷,2012,48(05):49-51+79.LI Y,ZHANG C,LI S Y.China Ceramics.2012,48(05):49-51+79.
    [10]段晓娜,孙羊羊,张海红,等.硅溶胶的研究进展及应用[J].硅酸盐通报,2014,33(04):836-840.DUAN X N,SUN Y Y,ZHANG H H,et al.Bulletin of The Chinese Ceramic Society,2014,33(04):836-840.
    [11]张县云,宋学锋,高瑞.纳米硅溶胶对水泥砂浆力学性能的影响及其作用机理初探[J].硅酸盐通报,2014,33(03):589-592.ZHANG X Y,SONG X F,GAO R.Bulletin of The Chinese Ceramic Society,2014,33(03):589-592.
    [12]杨丽静,田辉平,龙军,等.碱性硅溶胶稳定性的研究[J].石油炼制与化工,2010,41(06):12-16.YANG L J,TIAN H P,LONG J,et al.Petroleum processing and Petrochemicals,2010,41(06):12-16.
    [13]袁景辉.硅溶胶粘度的测定及其在催化剂制备工艺中的应用[J].石油化工,1981,(10):683-687+729.YUAN J H.Petrochemicals Technology,1981,(10):683-687+729.
    [14]朱新文,江东亮,谭寿洪,等.氧化铝粉体在硅溶胶中分散行为的研究[J].硅酸盐学报,2001,29(3):263-266.ZHU X W,JIANG D L,TAN S H,et al.Journal of the Chinese Ceramic Society,2001,29(3):263-266.
    [15]潘颖.烧结助剂对硅酸钙生物陶瓷的显微结构和力学性能的影响[D].中国科学院大学,2016.
    [16]马红萍,祝邦文,王建武,等.硅溶胶的凝胶化包覆对氧化铝烧结性能的影响[J].稀有金属材料与工程,2010,39(S2):463-466.MA H P,ZHU B W,WANG J W,et al.Rare metal materials and Engineering,2010,39(S2):463-466.