摘要
随着TD-LTE网络大规模的投入商用,其后续演进技术TD-LTE-Advanced受到越来越多的关注。由于载波聚合CA和UL-MIMO技术的引入使得对TD-LTE-Advanced终端信号分析成为了终端射频一致性测试的一个关键点。本文在分析了TD-LTE-Advanced终端频谱发射模板测量原理的基础上,提出了一种快速测量方法和硬件实现技术,并进行了实际测量实验。测量结果验证了所提方法的有效性。
With the wide applications of TD-LTE network in commerce, the TD-LTE-Advanced which evolves from the TD-LTE network is gaining more and more attention. Due to the introduction of carrier aggregation(CA)and UL-MIMO technology, the terminal signal analysis of the TD-LTE-Advanced has become a key point of the terminal RF conformance testing. Based on the analysis of the principle of the TD-LTE-Advanced terminal spectrum emission template measurement, a fast measurement method and the hardware implementation technology are proposed, and a measurement experiment is carried out. The validity of the proposed method is verified by the measurement results.
引文
[1]王映民,孙绍辉.TD-LTE技术原理与系统设计[M].北京:人民邮电大学出版社,2010.
[2]林辉,焦慧颖,等,LTE-Advanced关键技术详解[M].北京:人民邮电大学出版社,2012
[3]赵明宇,周俊,等.TD-LTE测试终端现状及性能对比方法[J].移动通信,2013(,19).
[4]王立春.LTE与LTE-A通用射频测试方案[J].电信网技术,2012,(6).
[5]陈发堂,梁涛涛,等.LTE-A系统软解调算法仿真及DSP实现[J].计算机应用研究.2011,(12).
[6]赵阳,石美宪,等.TD-LTE-Advanced新技术研究及终端设计和测试挑战[J].电信网技术.2012,(8).
[7]张翔,李文宇,等.LTE-Advanced MIMO增强技术研究[J].电信科学,2014,(3).
[8]3GPP TS 36.521-1 V11.1.0 User Equipment(UE)conformance specification Radio transmission and reception(Release 11)[S],2013.
[9]3GPP TS 36.211 V12.3.0 LTE;Evolved Universal Terrestrial Radio Access(E-UTRA);Physical channels and modulation(Release 12)[S],2014.
[10]3GPP TS 36.212 V12.2.0 LTE;Evolved Universal Terrestrial Radio Access(E-UTRA);Multiplexing and channel coding(Release 12)[S],2014.