摘要
在轨道客车整车车体静强度试验测试前,需要首先保证整个试验测试系统的准确性.通过使用两种不同目标质量和悬臂长度的样件,进行两种试验方案的弯曲试验及分析计算,将实测应变与理论计算和有限元计算得到的应变预测值分别进行比较,并通过定义局部坐标系对不同方向应变片进行计算分析,最终通过分析与试验对比的结果,对不同方向应变片的测量进行校核及确认,具有较强的实用性及理论依据.
Aiming at the accuracy of vehicle static strength test of passenger car, two different masses and cantilever length samples are used, and bending test and analytical calculation of the two test schemes are conducted. The measured strains are compared with the theoretical calculations and the finite element calculated strain prediction values respectively, and the strain gauges in different directions are calculated and analyzed by defining the local system. Finally, the results of analysis and test comparison are used to check and confirm the measurement of strain gauges in different directions, which has strong practicability and theoretical basis.
引文
[1]田家熙.应变花角度偏差对主应变测量的影响及其消除方法[J]. 武汉钢铁学院学报,1984(3):31-36.
[2]栗震霄.应变片的贴片方位偏差对测量结果的影响[J].计量技术,1994(9):23-25.
[3]李艳,李新娥,裴东兴.应变式压力传感器及其应用电路设计[J].计量与测试技术,2007,34(12):32-33.
[4]闫好奎,任建国.电阻应变片的工作原理[J].计量与测试技术,2013,40(4):12.
[5]王军,李建超.应变测试方法探究[J].电子测试,2013(8):103-104.