机械研磨单晶金刚石刀具前刀面精度

详细信息    查看全文 | 推荐本文 |

英文篇名：Precision of rake face of mechanically lapped single crystal diamond tool 作者：吴百融 ; 薛常喜 英文作者：WU Bairong;XUE Changxi;School of Optoelectronic Engineering, Changchun University of Science and Technology; 关键词：金刚石刀具 ; 机械研磨 ; 研磨盘 ; 晶向 ; 表面粗糙度 英文关键词：diamond tool;;mechanical grinding;;scaife;;crystal orientation;;surface roughness 中文刊名：JGSM 英文刊名：Diamond & Abrasives Engineering 机构：长春理工大学光电工程学院; 出版日期：2019-04-20 出版单位：金刚石与磨料磨具工程 年：2019 期：v.39;No.230 基金：吉林省重点科技研发项目(20180201030GX) 语种：中文; 页：JGSM201902005 页数：5 CN：02 ISSN：41-1243/TG 分类号：25-29

摘要

为提高金刚石刀具的精度,理论分析机械研磨法加工金刚石前刀面的模型,并实验研究研磨盘表面质量和研磨晶向对金刚石刀具前刀面粗糙度的影响。结果表明:研磨盘经过充分平整后,刀具前刀面的粗糙度R_a由1.308 nm下降到0.920 nm。在(110)晶面精细研磨时,<100>晶向研磨后的表面粗糙度为0.540 nm,<110>晶向研磨后的表面粗糙度为0.430 nm,实现了对金刚石刀具的精密研磨。
        In order to improve the precision of diamond tool, the model of mechanical lapping diamond rake surface is analyzed, and experiments are implemented to study the influence of scaife pre-lapping quality and lapping crystal direction on the rake surface precision of diamond tool. After fully pre-lapping the scaife, the roughness R_a of the diamond tool rake surface decreases from 1.308 nm to 0.920 nm. In the fine lapping of(110) crystal surface, the surface roughness of <100> crystal orientation after lapping is 0.540 nm and the surface roughness along <110> crystal orientation is 0.430 nm, realizing the precision lapping of diamond tools.

引文

[1] 巩岩,赵磊.单点金刚石车床及其在光学工程领域的应用 [J].中国光学,2011,4(6):537–545.GONG Yan,ZHAO Lei.Single point diamond machines and their applications to optical engineering [J].Chinese Optics,2011,4(6):537-545.
    [2] ZHANG S J,TO S,WANG S J,et al.A review of surface roughness generation in ultra-precision machining [J].International Journal of Machine Tools and Manufacture,2015,91:76-95.
    [3] FIELD J E,PICKLES C S J.Strength,fracture and friction properties of diamond [J].Diamond and Related Materials,1996,5(6-8):625-634.
    [4] AKIHISA KUBOTA,SAKAE FUKUYAMA,YUYA ICHIMORI,et al.Surface smoothing of single crystal diamond (100) substrate by polishing technique [J].Diamond and Related Materials,2012,24:59-62.
    [5] 徐宗伟,李万里,兀伟,等.聚焦离子束加工单晶体金刚石刀具实验研究 [J].纳米技术与精密工程,2014,12(6):424–428.XU Zongwei,LI Wanli,WU Wei,et al.Experimental research on fabrication of single crystal diamond tool based on focused ion beam technology [J].Nanotechnology and Precision Engineering,2014,12(6):424-428.
    [6] JOSWIG A,BARTHOLOME P,RISSE S,et al.Femtosecond laser structuring of diamond tool tips for microoptics fabrication [C]// European Society for Precision Engineering and Nanotechnology.Proceedings of the Euspen International Conference.Delft:European Society for Precision Engineering and Nanotechnology:2010.
    [7] 孙涛,宗文俊,李增强.天然金刚石刀具制造技术 [M].哈尔滨:哈尔滨工业大学出版社,2013.SUN Tao,ZONG Wenjun,LI Zengqiang.Fabrication technologies of natural diamond tools [M].Harbin:Harbin Institute of Technology Press,2013.
    [8] 姚晨佼,李亮,秦子龙.单晶金刚石微型刀具刃磨试验研究 [J].金刚石与磨料磨具工程,2016,36(3):28–32.YAO Chenjiao,LI Liang,QIN Zilong.Experiment study on single crystal diamond micro-tool sharpening [J].Diamond & Abrasives Engineering,2016,36(3):28-32.
    [9] DORONIN M A,LARIONOV K V,TROSCHIEV S Y,et al.Dependence of synthetic diamond wear rate on lattice orientation [J].Journal of Surface Investigation:X-ray,Synchrotron and Neutron Techniques,2017,11(6):1192-1195.
    [10] ZONG W J,LI D,SUN T,et al.Contact accuracy and orientations affecting the lapped tool sharpness of diamond cutting tools by mechanical lapping [J].Diamond & Related Materials,2006,15(9):1424-1433.
    [11] HIRD J R,FIELD J E.Diamond polishing [J].Proceeding of the Royal Society A:Mathematical Physical and Engineering Sciences,2004,460(2052):3547-3568.
    [12] BIFANO T G,DOW T A,SCATTERGOOD R O.Ductile-regime grinding:a new technology for machining brittle materials [J].Journal of Engineering for Industry,Transactions of the ASME,1991,113(2):184-189.
    [13] ZONG W J,LI D,CHENG K,et al.The material removal mechanism in mechanical lapping of diamond cutting tools [J].International Journal of Machine Tools and Manufacture,2005,45(7-8):783-788.
    [14] 李智,马勇,李嫚,等.单晶金刚石刀具研磨方法的探讨 [J].金刚石与磨料磨具工程,2003(6):51–54.LI Zhi,MA Yong,LI Man,et al.Study on the grinding method of single crystal diamond cutters [J].Diamond & Abrasives Engineering,2003(6):51-54.