摘要
在轴系回旋振动研究中,将艉轴承支承分为单点支承、多点支承、分布支承及接触支承四种方式,应用有限元方法,针对不同支承分别建立相应的轴系回旋振动模型,求得艉轴承不同支承方式的支反力以及等效支点位置,并进行相应的回旋振动模态分析。计算结果表明,不同支承方式的等效支点位置对轴系回旋振动固有频率有一定影响。
In the research of whirling vibration,there are four supporting types in stern bearing such as single,multipoint,distribution and contact supporting.Finite element method was used to found relevant shaft whirling vibration model respectively to get the reaction forces and equivalent supporting point locations under different supporting types,analyze whirling vibration modal.The results showed that different supporting type's equivalent supporting point locations has certain effect upon shaft whirling vibration.
引文
[1]鲁胜.艉轴承支承点位置对轴系回旋振动的影响研究[D].武汉:武汉理工大学,2012.
[2]陈国钓,曾凡明.现在舰船轮机工程[M].长沙:国防科技大学出版社[M].2000.
[3]周春良,刘占生,郑洪涛.轴承支承长度及间距对船舶轴系振动特性影响[J].船舶工程,2007,29(5):16-18.
[4]American Bureau of Shipping.Marine Engineering Sys-tems Department.Shaft alignment optimization softwareusers manual&theoretical background[S].New York:American Bureau of Shipping,2006.
[5]魏海军,王宏志.船舶轴系校中多支承问题的研究[J].船舶力学,2001(5):49-54.
[6]MURAWAKI Lech.Shaft line whirling vibrations:effectsof numerical assumptions on analysis results[J].MarineTechnology,2005,42(2):53-60.