超声波探伤技术在金属内衬压力容器检测中的应用研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Application of ultrasonic flaw detection technology in metal lined pressure vessel inspection 作者：陈诚 ; 乔业程 英文作者：CHEN Cheng;QIAO Ye-cheng;Dalian Boiler and Pressure Vessel Inspection Research Institute Co., Ltd.; 关键词：超声波探伤技术 ; 压力容器 ; 无损探伤 ; DAC曲线 英文关键词：ultrasonic flaw detection technology;;pressure vessel;;non-destructive testing;;DAC curve 中文刊名：COLO 英文刊名：World Nonferrous Metals 机构：大连锅炉压力容器检验检测研究院有限公司; 出版日期：2019-04-04 14:33 出版单位：世界有色金属 年：2019 期：No.518 语种：中文; 页：COLO201902107 页数：2 CN：02 ISSN：11-2472/TF 分类号：218-219

摘要

超声波探伤技术是利用超声波的机械波特性进行探伤的,应用超声波的波动情况以及振动频率来检测被被测工件的缺陷,因其不具破坏性,被广泛应用于机械、冶金等部门,基此提出超声波探伤技术在金属内衬压力容器检测中的应用研究。通过对超声波探伤仪进行校准,应用校准后的探伤仪完成金属内衬压力容器的检测,确定压力容器的缺陷,从而完成其应用研究。通过实例分析得出,提出的应用具有较高的准确性。
        Ultrasound flaw detection technology is based on the mechanical wave characteristics of ultrasound. It uses the fluctuation of ultrasound and vibration frequency to detect the defects of the workpiece under test. Because it is not destructive, it is widely used in machinery, metallurgy and other departments. Based on this, the application of ultrasonic flaw detection technology in the detection of metal lined pressure vessels is put forward. Through the calibration of the ultrasonic flaw detector, the metal lined pressure vessel is tested by the calibrated flaw detector, and the defects of the pressure vessel are determined, so as to complete its application research. Through the analysis of an example, it is concluded that the proposed application has high accuracy.

引文

[1]刘志勇,彭朝勇.一种基于轴端耦合的实心车轴相控阵超声波探伤方法[J].机车电传动,2018.
    [2]胡玉琦,吴志远,吕鸣江,et al.反应堆压力容器检查机主立柱同步运动研究[J].机械设计与制造,2017(1):137-141.