BNi-2和BNi71CrSi钎料钎焊K405合金接头组织与性能比较

详细信息    查看全文 | 推荐本文 |

英文篇名：Comparative study about microstructure and property of K405 alloy brazing joint by using BNi-2 and BNi71CrSi filler metals 作者：郑医 ; 张宇慧 ; 陈玉宝 英文作者：ZHENG Yi;ZHANG Yuhui;CHEN Yubao;AECC Harbin Dongan Engine Ltd.; 关键词：铸造高温合金 ; 不同钎料 ; 真空钎焊 ; 组织与性能 英文关键词：foundry high-temperature alloy;;different filler metals;;vacuum brazing;;microstructure and property 中文刊名：DHJI 英文刊名：Electric Welding Machine 机构：中国航发哈尔滨东安发动机有限公司; 出版日期：2019-06-20 出版单位：电焊机 年：2019 期：v.49;No.385 语种：中文; 页：DHJI201906007 页数：4 CN：06 ISSN：51-1278/TM 分类号：45-48

摘要

分别采用BNi-2钎料和BNi71CrSi钎料对铸造高温合金K405进行真空钎焊,同时对K405材料的真空钎焊工艺、力学性能和金相组织进行对比研究。结果表明,利用BNi-2和BNi71CrSi两种钎料钎焊K405材料,获得的接头组织均良好;与BNi-2钎料相比,BNi71CrSi钎料钎焊K405的焊接接头性能更高。为保证钎焊接头质量,钎焊间隙小于50μm。
        Filler metals of BNi-2 and BNi71 CrSi were used to vacuum-braze foundry high-temperature alloy K405. The processes of vacuum brazing,mechanical properties and microstructures were compared for the two kinds of filler metals. It resulted that the microstructure of the two kinds of different brazed joints were well. Compared with BNi-2 filler metal,the property of the joint brazed with BNi71 CrSi was higher. In order to ensure the quality of the brazed joint,the gap of vacuum brazing should be less than 50 μm.The test results showed that the design of high frequency hybrid twin-electrode TIG power reached the expected goal.

引文

[1]陈波,熊华平,毛唯,等.采用Au基钎料真空钎焊Al2O3陶瓷[J].焊接学报,2016(11):47-50.
    [2]熊华平,毛建英,陈冰清,等.航空航天轻质高恩结构材料的焊接技术研究进展[J].材料工程,2013(13):1-12.
    [3]陈云峰,熊华平,毛唯,等. Al-Si钎料对Ti3Al基合金的表面改性研究[J].焊接,2011(03):18-22.
    [4]任海水,熊华平,吴欣,等.钛铝系合金与镍基高温合金异种连接技术研究进展[J].机械工程学报,2017(04):1-10.
    [5]李文文,熊华平,陈波,等. Cu-Pd-V钎料真空钎焊Cf/SiBCN复合材料的界面组织与性能[J].焊接学报,2018(9):90-94.