微波管电子枪激光焊接工艺分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Analysis on the processing technology of the electron gun for microwave tubes using pulsed laser welding 作者：王博锋 ; 张兆传 ; 胡旭华 ; 周健勇 英文作者：WANG Bo-feng;ZHANG Zhaochuan;HU Xuhua;ZHOU Jianyong;Key Laboratory of High Power Microwave Sources and Technologies, Institute of Electronics;School of Electronic,Electrical and Communication Engineering,Chinese Academy of Sciences; 关键词：微波管 ; 电子枪 ; 激光焊接工艺 ; 可靠性 英文关键词：microwave tubes;;electron gun;;laser welding processing parameters;;reliability 中文刊名：HJXB 英文刊名：Transactions of the China Welding Institution 机构：中国科学院电子学研究所高功率微波源与技术重点实验室;中国科学院大学电子电气与通信工程学院; 出版日期：2018-04-25 出版单位：焊接学报 年：2018 期：v.39 基金：国家重点基础研究发展计划资助项目(2013CB328901) 语种：中文; 页：HJXB201804003 页数：7 CN：04 ISSN：23-1178/TG 分类号：14-19+132

摘要

采用脉冲固体激光器微波管电子枪进行激光焊接工艺试验,利用金相显微镜、扫描电镜、万能材料试验机、电子显微硬度分析仪、X射线衍射仪、振动台、电子枪真空除气系统等研究了电子枪金属零件焊缝焊接表面成形、接头区域的组织形貌、界面元素分布、断口形貌、显微硬度与接头力学性能、焊接接头物相、电子枪随机振动及工作状态下电性能和热性能.结果表明,优化焊接参数后焊接的电子枪经受了在微波管中连续高温工作的考验.振动试验和电子枪性能试验检验了电子枪组件的焊接牢固程度和焊接质量,验证了激光焊接工艺在小批量微波管研制、生产和应用过程中的可靠性.
        The laser welding test was carried out on the electron gun of microwave tubes. The weld surface morphology,microstructure,interface element distribution,fracture morphology,main phase,hardness,mechanical properties,vibration and electrical property were studied by metallography microscope,scanning electron microscopy,X-ray diffraction,electron microhardness analyzer,vibration table and vacuum degassing system.The results indicated that the morphology of welding surface could be improved through the optimised welding parameters and the electron guns survived in continuous high temperature working condition. The vibration and electrical property test examined the welding quality for the electron guns. Meanwhile,the reliability of laser welding process in the development,production,and application of microwave tubes has been verified.

引文

[1]丁耀根.大功率速调管的设计制造和应用[M].北京:国防工业出版社,2010.
    [2]周惦武,田伟,徐少华,等.激光焊接镁/铝异种金属的显微组织与性能[J].稀有金属材料与工程,2015,44(10):2440-2444.Zhou Dianwu,Tian Wei,Xu Shaohua,et al.Microstructure and mechanical properties of magnesium/aluminum alloy laser welding[J].Rare Metal Materials and Engineering,2015,44(10):2440-2444.
    [3]陈德龙,竺佩芳,周光辉,等.JH-1型激光焊接机及焊接工艺试验[J].激光与红外,1988(4):39-42.Chen Delong,Zhu Peifang,Zhou Guanghui,et al.JH-1 laser welding machine and welding tests[J].Journal of laser and Infrared,1988(4):39-42.
    [4]黄维玲,游立德,李家伟,等.电子枪组焊中激光焊接工艺参数与方法的研究[J].中国激光,1994,21(10):840-844.Huang Weiling,You Lide,Li Jiawei,et al.Research of processing technology for assembly of CRT electron gun using pulsed laser welding[J].Chinese Journal of Lasers,1994,21(10):840-844.
    [5]金亮.Ta/Mo异种金属激光焊工艺研究及数值模拟[D].广州:华南理工大学,2013.
    [6]游德勇,高向东.激光焊接技术的研究现状与展望[J].焊接技术,2008,37(4):5-9.You Deyong,Gao Xiangdong.Studies and prospects of laser welding technology[J].Welding Technology,2008,37(4):5-9.
    [7]Salminen A S,Kujanpaeae V P,Moisio T J I.Interactions between laser beam and fillermetal[J].Welding Journal,1996,75(1):9-13.
    [8]秦国梁,林尚扬.激光焊接体能量及其对激光深熔焊缝熔深的影响[J].焊接学报,2006,27(7):74-76.Qin Guoliang,Lin Shangyang.Laser welding volume energy and its influence on weld penetration in laser deep penetration welding[J].Transactions of the China Welding Institution,2006,27(7):74-76.
    [9]虞钢,赵树森,张永杰,等.异种金属激光焊接关键问题研究[J].中国激光,2009,36(2):261-268.Yu Gang,Zhao Shusen,Zhang Yongjie,et al.Research on key issues of laser welding of dissimilar metal[J].Chinese Journal of Lasers,2009,36(2):261-268.
    [10]冯志良,赵金玉,李海涛,等.电真空器件烘烤排气过程中残余气体质谱分析[J].真空科学与技术学报,2014,34(4):325-328.Feng Zhiliang,Zhao Jinyu,Li Haitao,et al.Real-time mass spectroscopy study of residual gases in degassing of high power klystron[J].Chinese Journal of Vacuum Science and Technology,2014,34(4):325-328.
    [11]李庆生,阮存军,赵鼎,等.X波段带状电子注速调管电子枪组件热分析[J].微波学报,2010(8):478-481.Li Qingsheng,Ruan Cunjun,Zhao Ding,et al.Thermal-stress analysis of the electon gun of X-band sheet beam klystron[J].Journal of Microwaves,2010(8):478-481.
    [12]达道安.真空设计手册[M].北京:国防工业出版社,2004.
    [13]付俊,黄坚,姚成武,等.铜钢激光对接焊研究[J].中国激光,2009,36(5):1256-1260.Fu Jun,Huang Jian,Yao Chengwu,et al.Laser butt welding for copper-steel joint[J].Chinese Journal of Lasers,2009,36(5):1256-1260.