摘要
土体三轴抗剪强度受干密度、含水率、周围压力等多因素共同影响,讨论各因素对抗剪强度影响强弱是土力学中的一项重要工作。采用偏相关分析方法控制其他影响因素作用,依据偏相关系数大小,得到了三个因素对粉土抗剪强度影响程度相对强弱关系为:含水率>围压>干密度,可靠概率大于99%。
The triaxial shear strength of soil is affected by many factors such as dry density,water content and surrounding pressure. It is an important work in soil mechanics to discuss the influence of various factors on shear strength. The partial correlation analysis method is proposed to control the other influencing factors. According to the partial correlation coefficient,the relative strength of the three factors on the shear strength of silt is obtained: water content > confining pressure > dry density.
引文
[1]姚云泉.基于深圳某边坡的边坡稳定性敏感因素分析[J].四川建材,2018,44(11):104-105.
[2]韦翠,阮航,王斌.山区公路边坡稳定性参数敏感性分析[J].土工基础,2017,31(4):462-464.
[3]林贤蓬,周燕聪.某路堑边坡稳定影响因素敏感性分析[J].中国水运(下半月),2009,9(9):265-266.
[4]严丽坤.相关系数与偏相关系数在相关分析中的应用[J].云南财贸学院学报,2003,19(3):78-80.
[5]王海燕,杨方廷,刘鲁.标准化系数与偏相关系数的比较与应用[J].数量经济技术经济研究,2006(9):150-155.
[6]朱志坤.干密度和含水量对太原重塑黄土强度及强度参数影响的研究[D].太原:太原理工大学,2018.
[7]彭幸福.湿陷性黄土的力学性质分析和处理对策[J].公路交通科技(应用技术版),2009,5(8):92-94.
[8]张秀丽,梁文辉,张艳,等.人工压实黄土工程力学性质的试验研究[J].低温建筑技术,2011,33(8):97-98.