摘要
A thermal barrier coating system comprising Pt-modified NiCoCrAlY bond coating and nanostructured 4mol.% yttria stabilized zirconia(4YSZ, hereafter) top coat was fabricated on a second generation Ni-base superalloy. Thermal cycling behavior of NiCoCrAlY-4 YSZ thermal barrier coatings(TBCs) with and without Pt modification was evaluated in ambient air at 1100?C up to 1000 cycles, aiming to investigate the effect of Pt on formation of thermally grown oxide(TGO) and oxidation resistance. Results indicated that a dual layered TGO, which consisted of top(Ni,Co)(Cr,Al)_2O_4 spinel and underlying α-Al_2O_3, was formed at the NiCoCrAlY/4 YSZ interface with thickness of 8.4μm, accompanying with visible cracks at the interface. In contrast, a single-layer and adherent α-Al_2O_3 scale with thickness of 5.6μm was formed at the interface of Pt-modified NiCoCrAlY and 4 YSZ top coating. The modification of Pt on NiCoCrAlY favored the exclusive formation of α-Al_2O_3 and the reduction of TGO growth rate, and thus could effectively improve overall oxidation performance and extend service life of TBCs. Oxidation and degradation mechanisms of the TBCs with/without Pt-modification were discussed.
A thermal barrier coating system comprising Pt-modified NiCoCrAlY bond coating and nanostructured 4mol.% yttria stabilized zirconia(4YSZ, hereafter) top coat was fabricated on a second generation Ni-base superalloy. Thermal cycling behavior of NiCoCrAlY-4 YSZ thermal barrier coatings(TBCs) with and without Pt modification was evaluated in ambient air at 1100?C up to 1000 cycles, aiming to investigate the effect of Pt on formation of thermally grown oxide(TGO) and oxidation resistance. Results indicated that a dual layered TGO, which consisted of top(Ni,Co)(Cr,Al)_2O_4 spinel and underlying α-Al_2O_3, was formed at the NiCoCrAlY/4 YSZ interface with thickness of 8.4μm, accompanying with visible cracks at the interface. In contrast, a single-layer and adherent α-Al_2O_3 scale with thickness of 5.6μm was formed at the interface of Pt-modified NiCoCrAlY and 4 YSZ top coating. The modification of Pt on NiCoCrAlY favored the exclusive formation of α-Al_2O_3 and the reduction of TGO growth rate, and thus could effectively improve overall oxidation performance and extend service life of TBCs. Oxidation and degradation mechanisms of the TBCs with/without Pt-modification were discussed.
引文
[1]N.P.Padture,M.Gell,E.H.Jordan,Science 296(2002)280-284.
[2]B.Goswami,A.K.Ray,S.K.Sahay,High Temp,Mater.Process.23(2004)73-92.
[3]R.Xu,X.L.Fan,T.J.Wang,Appl.Surf.Sci.370(2016)394-402.
[4]A.G.Evans,D.R.Mumm,J.W.Hutchinson,G.H.Meier,F.S.Pettit,Prog.Mater.Sci.46(2001)505-553.
[5]W.R.Chen,X.Wu,B.R.Marple,P.C.Patnaik,Surf.Coat.Technol.201(2006)1074-1079.
[6]H.R.Yao,Z.B.Bao,M.L.Shen,S.L.Zhu,F.H.Wang,Appl.Surf.Sci.407(2017)485-494.
[7]B.M.Warnes,Surf.Coat.Technol.163(2003)106-111.
[8]S.J.Hou,S.L.Zhu,T.Zhang,F.H.Wang,Appl.Surf.Sci.324(2015)1-12.
[9]F.H.Yuan,Z.G.Wang,C.Sun,S.J.Zhu,J.Mater.Sci.Technol.20(2004)85-88.
[10]C.Ren,Y.D.He,D.R.Wang,Surf.Coat.Technol.206(2011)1461-1468.
[11]C.Viazzi,J.P.Bonino,F.Ansart,Surf.Coat.Technol.201(2006)3889-3893.
[12]K.Jiang,S.B.Liu,X.Wang,Ceram.Int.43(2017)12633-12640.
[13]X.F.Zhang,K.Zhou,W.Xu,J.B.Song,C.M.Deng,M.Liu,J.Mater.Sci.Technol.31(2015)1006-1010.
[14]X.Q.Niu,M.Xie,F.Zhou,R.D.Mu,X.W.Song,S.L.An,J.Mater.Sci.Technol.30(2014)381-386.
[15]J.Karthikeyan,C.C.Berndt,J.Tikkanen,S.Reddy,Mater.Sci.Eng.A 238(1997)275-286.
[16]C.B.Liu,Z.M.Zhang,X.L.Jiang,M.Liu,Z.H.Zhu,Trans.Nonferrous Met.Soc.China 19(2009)99-107.
[17]R.Prescott,M.J.Graham,Oxid.Met.38(1992)233-254.
[18]L.Y.Ni,C.Liu,H.Huang,C.G.Zhou,J.Therm.Spray Technol.20(2011)1133-1138.
[19]E.A.G.Shilington,D.R.Clarke,Acta Mater.47(1999)1297-1305.
[20]Y.N.Wu,G.Zhang,B.C.Zhang,Z.C.Feng,Y.Liang,F.J.Liu,J.Mater.Sci.Technol.17(2001)525-528.
[21]M.Daroonparvar,J.Rare Earth 33(2015)983-994.
[22]V.K.Tolpygo,D.R.Clarke,Surf.Coat.Technol.200(2005)1276-1281.
[23]N.M.Yanar,G.H.Meier,F.S.Pettit,Scr.Mater.46(2002)325-330.
[24]J.A.Haynes,M.J.Lance,B.A.Pint,I.G.Wright,Surf.Coat.Technol.146(2001)140-146.
[25]K.G.Schmitt-Thomas,M.Hertter,Surf.Coat.Technol.120(1999)84-88.
[26]K.Jiang,S.Liu,Y.Li,Y.F.Li,J.Am.Ceram.Soc.97(2014)990-995.
[27]G.M.Kim,N.M.Yanar,E.N.Hewitt,F.S.Pettit,G.H.Meier,Scr.Mater.46(2002)489-495.
[28]N.Birks,G.H.Meier,F.S.Pettit,Introduction to the High-temperature Oxidation of Metals,second ed.,Cambridge University Press,2006,pp.111-115.
[29]G.W.Goward,Surf.Coat.Technol.108(1998)73-79.
[30]M.J.Pomeroy,Mater.Des.26(2005)223-231.
[31]D.Seo,K.Ogawa,Y.Suzuki,K.Ichimura,T.Shoji,S.Murata,Appl.Surf.Sci.255(2008)2581-2590.
[32]P.Poza,P.S.Grant,Surf.Coat.Technol.201(2006)2887-2896.
[33]J.Jiang,H.Zhao,X.Zhou,S.Tao,C.Ding,Appl.Surf.Sci.261(2012)422-430.
[34]W.R.Chen,X.Wu,B.R.Marple,R.S.Lima,P.C.Patnaik,Surf.Coat.Technol.202(2008)3787-3796.
[35]Q.Zhang,C.J.Li,C.X.Li,G.J.Yang,S.C.Lui,Surf.Coat.Technol.202(2008)3378-3384.
[36]W.R.Chen,X.Wu,D.Dudzinski,P.C.Patnaik,Surf.Coat.Technol.200(2006)5863-5868.
[37]J.P.Stacy,Y.Zhang,B.A.Pint,J.A.Haynes,B.T.Hazel,B.A.Nagaraj,Surf.Coat.Technol.202(2007)632-636.
[38]M.S.Farrell,D.H.Boone,R.Streiff,Surf.Coat.Technol.32(1987)69-84.
[39]D.K.Das,M.Roy,V.Singh,S.V.Joshi,Mater.Sci.Technol.15(1999)1199-1208.
[40]J.G.Fountain,F.A.Golightly,F.H.Scott,G.C.Wood,Oxid.Met.10(1976)341-345.
[41]R.Swadz′ba,Appl.Surf.Sci.445(2018)133-144.
[42]E.J.Felten,F.S.Petit,Oxid.Met.10(1976)189-222.
[43]I.M.Allam,H.C.Akuezue,D.P.Whittle,Oxid.Met.14(1980)517-530.
[44]E.J.Felten,Oxid.Met.10(1976)23-28.
[45]G.J.Tatlock,T.J.Hurd,Oxid.Met.22(1984)201-226.
[46]G.Liu,Y.Niu,W.Wang,W.Wu,J.Chin.Soc.Corros.Prot.03(2000)511-519.
[47]Y.Cadoret,D.Monceau,M.P.Bacos,P.Josso,V.Maurice,P.Marcus,Oxid.Met.56(2005)185-205.
[48]K.A.Marino,E.A.Carter,Acta Mater.64(2008)3502-3510.
[49]P.Marcus,I.Olefjord,J.Oudar,Corros.Sci.24(1984)269-278.