摘要
以铜浮选尾渣为原料,采用直接熔融还原—磁选的方法回收铁,探讨了在焙烧温度为1 350℃时,碳粉、氧化钙用量及焙烧恒温时间对还原渣磁选过程铁回收率与铁精矿品位的影响。结果表明,在碳粉和氧化钙添加量分别为铜渣质量的32%和10%、恒温100min的条件下对浮选尾渣进行熔融还原,焙烧后的产物破碎磨细至-0.074mm占85%,再进行弱磁选,可获得铁品位为67.47%的还原铁精矿,铁回收率为92.32%。
Iron was recovered from copper flotation tailings by direct smelting reduction and magnetic separation.Effects of dosage of carbon powder and calcium oxide,and roasting time on iron recovery and iron concentrate in magnetic separation of reduced slag at roasting temperature of 1 350℃ were discussed.The results show that copper flotation tailings are smelting reduced under the conditions including dosage of carbon powder and calcium oxide of 32% and 10% mass fraction of copper slag,and roasting time of 100 min.Reduced iron concentrate with iron grade of 67.47% and iron recovery of 92.32%is obtained from calcine with particle size of 85% of -0.074 mm by magnetic separation.
引文
[1]詹保峰,黄自力,杨孽,等.焙烧—浸出—磁选回收铜渣中的铁[J].矿冶工程,2015,35(2):103-106.
[2]徐露,库建刚,林存键,等.从铜渣中回收铁的研究进展[J].现代化工,2016,36(2):26-29.
[3]赵凯,程相利,齐渊洪,等.铜渣处理技术分析及综合利用新工艺[J].中国有色冶金,2012,41(1):56-60.
[4]许冬,春铁军,陈锦安.铜渣高温快速还原焙烧-磁选回收铁的研究[J].矿冶工程,2017,37(1):89-91.
[5]王云,朱荣,郭亚光,等.铜渣还原磁选工艺试验研究[J].有色金属科学与工程,2014,5(5):61-67.
[6]杨慧芬,景丽丽,党春阁.铜渣中铁组分的直接还原与磁选回收[J].中国有色金属学报,2011,21(5):1165-1170.
[7]李磊,王华,胡建杭,等.铜渣综合利用的研究进展[J].冶金能源,2009,28(1):44-48.
[8]郭秀键,倪晓明,马丁,等.铜渣处理与综合利用[J].有色冶金设计与研究,2017,38(2):23-26.
[9]周占兴,周春芳.铜渣的新型资源化处理工艺[J].冶金设备,2015(1):51-54,24.