POE-g-MAH低温增韧聚酰胺6的研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Study on Low-temperature Toughened Polyamide 6 with POE-g-MAH 作者：郭红 ; 王秀秀 ; 关宏宇 ; 李亚林 ; 陆星宇 ; 陈利猛 ; 吕通建 英文作者：GUO Hong;WANG Xiuxiu;GUAN Hongyu;LI Yalin;LU Xingyu;CHEN Limeng;L■ Tongjian;College of Chemistry, Liaoning University;Shenyang Ketong Plastic Co, Ltd; 关键词：聚酰胺6 ; 增韧剂 ; 低温 英文关键词：polyamide 6;;toughener;;low temperature 中文刊名：ZGSU 英文刊名：China Plastics 机构：辽宁大学化学院;沈阳科通塑胶有限公司; 出版日期：2019-04-26 出版单位：中国塑料 年：2019 期：v.33;No.301 语种：中文; 页：ZGSU201904001 页数：5 CN：04 ISSN：11-1846/TQ 分类号：5-9

摘要

以聚酰胺6(PA6)为基体树脂,采用增韧剂马来酸酐接技聚烯烃弹性体(POE-g-MAH)对PA6进行增韧改性研究。制备了不同增韧剂含量的改性PA6,研究了POE-g-MAH的含量对复合材料力学性能及流动性能的影响,以及复合材料在常温、低温及高寒条件下的韧性及拉伸性能,并利用扫描电子显微镜对复合材料的微观形貌进行表征。结果表明,当增韧剂含量为20%(质量分数,下同)时,材料的综合性能较优;复合材料在低温下韧性良好,在-50℃高寒条件下,当增韧剂含量为20%、30%时仍具有良好的韧性,冲击强度较纯PA6提高了130%、350%,断裂伸长率较纯PA6提高了195%、230%;低温拉伸强度随着温度的降低呈上升趋势。
        The toughening modification of polyamide 6 with POE-g-MAH as an impact modifier was conducted, and the effect of POE-g-MAH content on the mechanical properties and flowability of polyamide 6/POE-g-MAH compounds was investigated. Most of all, the impact toughness of the compounds at normal and low temperatures as well as under an extremely cold condition were studied intensively. The microstructure of compounds was further characterized by SEM. The experimental results indicated that the compound with 20 wt % of POE-g-MAH exhibited optimium mechanical performance and good impact toughness at low temperatures. Even at an extreme low temperature of-50 ℃, the compounds containing 20 wt % and 30 wt % of POE-g-MAH still kept good toughness. Compared to pure polyamide 6, and the impact strength increased by 130 % and 350 %, and the elongation at break was improved by 195 % and 230 %. Moreover, the low-temperature tensile strength also increased with a decrease of temperature.

引文

[1] KIM J,LEE J,SON Y.Toughening of Nylon 6 with a Ethylene-octene Copolymer Grafted with Maleic Anhydride and Styrene[J].Materials Letters,2014,126:43-47.
    [2] 蒋波,蔡飞鹏,李晓宇,等.挤出过程对增韧尼龙6力学性能的影响[J].工程塑料应用,2018,46(1):49-52.JIANG B,CAI F P,LI X Y,et al.Influence of Extrusion Process on Mechanical Properties of Toughened Nylon 6[J].Engineering Plastics Application,2018,46(1):49-52.
    [3] 汲长远,张权,陈瑶,等.橡胶弹性体增韧尼龙性能的研究[J].声学与电子工程,2016(2):38-43.YAN C Y,ZHANG Q,CHEN Y,et al.Study on Pro-perties of Rubber Elastomer Toughened Nylon[J].Journal of Acoustics and Electronics,2016(2):38-43.
    [4] 方辉,吴方娟,谢中炜.热塑性淀粉增韧改性聚酰胺6的研究[J].中国塑料,2014,28(8):27-30.FANG H,WU F J,XIE Z W.Study on Toughening Modified Polyamide 6 by Thermoplastic Starch[J].China Plastics,2014,28(8):27-30.
    [5] 刘欣,刘伟强,谢续明,等.PA6/POE-g-MAH体系的结构与性能研究[J].中国塑料,2005(10):24-29.LIU X,LIU W Q,XIE X M,et al.Study on the Structure and Properties of PA6/POE-g-MAH System[J].China Plastics,2005(10):24-29.
    [6] 王萍丽,孔壮志,季君晖.POE-g-MAH对尼龙6的增韧改性[J].高分子材料科学与工程,2012,28(4):73-75,80.WANG P L,KONG Z Z,JI J H.Toughening Modification of Nylon 6 by POE-g-MAH[J].Polymer Materials Science & Engineering,2012,28(4):73-75,80.
    [7] 赵志,陈林飞,曹凯凯,等.POE-g-MAH增韧半芳香尼龙的研究[J].塑料工业,2015,43(5):14-17.ZHAO Z,CHEN L F,CAO K K,et al.Study on POE-g-MAH Toughened Semi-aromatic Nylon[J].China Plastics Industry,2015,43(5):14-17.
    [8] 王炜,杨云峰,王海平.尼龙增韧改性的研究进展[J].塑料制造,2008(Z1):116-121.WANG W,YANG Y F,WANG H P.Research Progress in Toughening Modification of Nylon[J].Plastics Manufacture,2008(Z1):116-121.
    [9] BUCKNALL C B,CLAYTON D,KEAST W E.Rubber Toughening of Plastics.2.Creep Mechanisms in HIPS/PPO Blends[J].J Mater Sci,1972,7(12):1 443-1 453.
    [10] 刘振宏,王静江,唐雄峰,等.POE-g-MAH增韧改性PA6的力学性能[J].天津大学学报,2009,42(2):173-176.LIU Z H,WANG J J,TANG X F,et al.Mechanical Properties of POE-g-MAH Toughened Modified PA6[J].Journal of Tianjin University,2009,42(2):173-176.
    [11] 魏伯荣,宋义虎.MPVQ的低温性能研究[J].高分子材料科学与工程,2005(2):217-219,224.WEI B R,SONG Y H.Study on Low Temperature Performance of MPVQ[J].Polymer Materials Science and Engineering,2005(2):217-219,224.