油气储罐缺陷的声发射无损检测定位精度优化

详细信息    查看全文 | 推荐本文 |

英文篇名：Optimized method of acoustic emission nondestructive testing location precision based on oil and gas tank 作者：申林 ; 侯东明 ; 齐红元 英文作者：Shen Lin;Hou Dongming;Qi Hongyuan;School of Mechanical Electronic and Control Engineering,Beijing Jiaotong University; 关键词：声发射 ; 定位方法 ; 定位精度 ; 影响因素 ; 参数优化 英文关键词：acoustic emission;;location algorithm;;location precision;;influence factor;;parameter optimization 中文刊名：STQG 英文刊名：Chemical Engineering of Oil & Gas 机构：北京交通大学机械与电子控制工程学院; 出版日期：2019-02-15 出版单位：石油与天然气化工 年：2019 期：v.48;No.249 语种：中文; 页：STQG201901019 页数：5 CN：01 ISSN：51-1210/TE 分类号：109-113

摘要

为实现油气储罐罐体损伤部位声发射信号源的精确定位,提出一种优化定位方法。该方法对基于时差定位算法主要影响因素(噪声干扰、信号衰减、波速变化、传感器布置以及尺寸效应等)的影响机理进行理论分析,然后找到声发射源定位算法与各影响因素之间的对应关系,完成相应源定位参数的优化设置,最后以罐体部分区域为研究对象,分别对源定位参数优化设置进行对比试验验证。实验结果表明,该优化定位方法通过对各影响因素对应的参数优化设置,能有效地减小油气储罐中声发射源定位的误差,提高其声发射源的定位精度,为反演声发射源提供了一种有效途径。
        In order to achieve accurate location of acoustic emission(AE) sources in oil and gas tank,an optimized location method is proposed.The theoretical analysis of the influence mechanism of the main factors,such as noise interference,signal attenuation,wave velocity variation,sensor layout and size effect etc.based on the TDOA location algorithm is carried out.Then the correspondence between AE location algorithm and various factors is found,and the optimal settings of the corresponding source location parameters are completed.Finally,a part of oil and gas tank steel plat is taken as the research object,and the optimal settings of the source location parameters are verified by comparative experiments.The experimental results show that based on the parameters settings optimization corresponding to the influencing factors,the optimized locating method can effectively reduce the AE source location error in tank steel plat,improve the location precision of the AE source,and provide an effective method for the inversion of AE sources.

引文

[1] 马洲. 基于声发射检测的液化石油气储罐全寿命定期检验[J]. 石化技术, 2016, 23(3): 123.
    [2] 于晓红, 于宏伟. 无损检测技术在液化石油气储罐设计中的应用分析[J]. 化工管理, 2017(24): 135.
    [3] 卢泓方, 吴晓南, ISELEY T, 等. 国外天然气管道检测技术现状及启示[J]. 天然气工业, 2018, 38(2): 103-111.
    [4] KUNDU T. Acoustic source localization[J]. Ultrasonics, 2014, 54(1): 25-38.
    [5] ZELENYAK A M, HAMSTAD M A, SAUSE M G R. Modeling of acoustic emission signal propagation in waveguides[J]. Sensors, 2015, 15(5): 11805-11822.
    [6] 陈俊杰. 油气管道漏磁检测缺陷区域的分段识别方法[J]. 中国测试, 2017, 43(11): 1-7.
    [7] MATT H, DI SCALEA L. Macro-fiber composite piezoelectric rosettes for acoustic source location in complex structures[J]. Smart Materials and Structures, 2007, 16(4): 1489-1499.
    [8] 沈功田, 耿荣生, 刘时风. 声发射源定位技术[J]. 无损检测, 2002, 24(3): 114-117.
    [9] KUNDU T, NAKATANI H, TAKEDA N. Acoustic source localization in anisotropic plates[J]. Ultrasonics, 2012, 52(6): 740-746.
    [10] BURKS B, KUMOSA M. A modal acoustic emission signal classification scheme derived from finite element simulation[J]. International Journal of Damage Mechanics, 2014, 23(1): 43-62.
    [11] 陈园园. 声发射信号处理及源定位方法研究[D]. 南京: 东南大学, 2017.
    [12] 许江, 李伊, 田傲雪, 等. 声发射定位精度尺寸效应的试验研究[J]. 岩石力学与工程学报, 2016, 35(增刊): 2826-2835.
    [13] KUNDU T, DAS S, JATA K V. Detection of the point of impact on a stiffened plate by the acoustic emission technique[J]. Smart Materials and Structures, 2009, 18(3): 035006.
    [14] KUNDU T, DAS S, MARTIN S A, et al. Locating point of impact in anisotropic fiber reinforced composite plates[J]. Ultrasonics, 2008, 48(3): 193-201.
    [15] 刘艳. 声发射检测中传感器布置及声源定位的研究[D]. 青岛: 中国海洋大学, 2011.
    [16] GROSSE C U, OHTSU M. Acoustic Emission Testing[M]. New York: Springer, 2008: 127-130.
    [17] 胜山邦久. 声发射(AE)技术的运用[M]. 北京: 冶金工业出版社, 1996.
    [18] 尹莘新. 基于三角时差技术的二维板声发射源定位方法研究[D]. 长春: 吉林大学, 2017.
    [19] 刘富君, 胡东明, 丁守宝, 等. 厚壁压力容器声发射技术声源定位误差分析[J]. 无损检测, 2009, 31(11): 842-846.
    [20] AGCAOGLU S, AKKUS O. Acoustic emission based monitoring of the microdamage evolution during fatigue of human cortical bone[J]. Journal of Biomechanical Engineering, 2013, 135(8): 081005.