基于无线传感网的飞行员生理训练监测系统
|
摘要
为提升飞行员生理训练的效果,设计了一种基于无线传感网的生理训练监测系统。系统通过传感器网络将体征数据实时采集并传输到上位机进行分析处理。系统主要由生理体征数据采集模块,接收模块,和PC机终端三部分组成。设计过程中采用了模块化的设计方法,使得系统可靠性高、扩展性好。实测表明:系统能对生理训练体征数据信息进行快速采集和传输,达到了预期设计要求。
In order to improve effect of pilot physiological training, a system based on wireless sensor networks is designed for physiological training monitoring. The system can collect physiological data and transfer to PC which can analyze. The system contains three major parts, physical sign data sensor module, MCU receive module and PC terminal. Because adapting modularized design method, it makes the whole system more reliable and extensible. Experimental results show that the system can real-time quickly collect and transfer physiological training data, this design achieved anticipated requirement.
In order to improve effect of pilot physiological training, a system based on wireless sensor networks is designed for physiological training monitoring. The system can collect physiological data and transfer to PC which can analyze. The system contains three major parts, physical sign data sensor module, MCU receive module and PC terminal. Because adapting modularized design method, it makes the whole system more reliable and extensible. Experimental results show that the system can real-time quickly collect and transfer physiological training data, this design achieved anticipated requirement.
引文
[1]郑霖,曾志民.基于IEEE802.15.4标准的无线传感器网络[J].传感器技术,2005(7):56-88.
[2]Howitt I,Gutierrez J.A.IEEE 802.15.4 low rate-wireless personal area network coexistence issues[J].Wireless Communications and Networking,2003(3):20-32.
[3]孙德辉,龚关飞,杨扬.基于CC2430的无线传感器网络系统设计[J].现代电子技术,2010(13):66-68.
[4]李文仲,段朝玉.Zigbee无线网络技术与实战[M].北京:北京航空航天大学,2007.
[5]孟庆斌,潘勇.基于CC2430的分布式无线温度测量系统设计[J].电子测量技术,2009(5):128-130.
[6]董杨波,邹向阳,李鹏.基于Zig Bee的伞兵位置监测系统[J].传感器与微系统,2013(6):88-90.
[7]梁光胜,刘丹娟,郝福珍.基于CC2430的Zig Bee无线网络节点设计[J].电子设计工程,2010(2):15-18.
[8]孙庆元,孔令成,张志华,等.基于Zig Bee的无线传感器网络监控系统的建立[J].仪表技术,2011(6):7-9.
[9]原羿,苏鸿根.基于Zig Bee技术的无线网络应用研究[J].计算机应用与软件,2004(6):89-90.
[10]李伟.基于Zig Bee的单片机无线通信系统实现[J].电子设计工程,2014(22):157-159.
[11]徐敬东,赵文耀,李淼.基于Zig Bee的无线传感器网络设计[J].计算机工程,2010(10):110-112.
[12]成小良,邓志东.基于Zig Bee规范构建大规模无线传感器网络[J].通信学报,2008(11):158-160.
[13]杨顺,章毅,陶康.基于Zig Bee和以太网的无线网关设计[J].计算机系统应用,2010(1):194-197.
[14]杨埙,王小平,彭勇.Zig Bee的无线传感闭环监控系统设计[J].单片机与嵌入式系统应用,2013(10):72-75.
[15]李伟跃.基于CC2430的无线传感网络中协调器的设计[J].电子设计工程,2011(20):133-135.
[2]Howitt I,Gutierrez J.A.IEEE 802.15.4 low rate-wireless personal area network coexistence issues[J].Wireless Communications and Networking,2003(3):20-32.
[3]孙德辉,龚关飞,杨扬.基于CC2430的无线传感器网络系统设计[J].现代电子技术,2010(13):66-68.
[4]李文仲,段朝玉.Zigbee无线网络技术与实战[M].北京:北京航空航天大学,2007.
[5]孟庆斌,潘勇.基于CC2430的分布式无线温度测量系统设计[J].电子测量技术,2009(5):128-130.
[6]董杨波,邹向阳,李鹏.基于Zig Bee的伞兵位置监测系统[J].传感器与微系统,2013(6):88-90.
[7]梁光胜,刘丹娟,郝福珍.基于CC2430的Zig Bee无线网络节点设计[J].电子设计工程,2010(2):15-18.
[8]孙庆元,孔令成,张志华,等.基于Zig Bee的无线传感器网络监控系统的建立[J].仪表技术,2011(6):7-9.
[9]原羿,苏鸿根.基于Zig Bee技术的无线网络应用研究[J].计算机应用与软件,2004(6):89-90.
[10]李伟.基于Zig Bee的单片机无线通信系统实现[J].电子设计工程,2014(22):157-159.
[11]徐敬东,赵文耀,李淼.基于Zig Bee的无线传感器网络设计[J].计算机工程,2010(10):110-112.
[12]成小良,邓志东.基于Zig Bee规范构建大规模无线传感器网络[J].通信学报,2008(11):158-160.
[13]杨顺,章毅,陶康.基于Zig Bee和以太网的无线网关设计[J].计算机系统应用,2010(1):194-197.
[14]杨埙,王小平,彭勇.Zig Bee的无线传感闭环监控系统设计[J].单片机与嵌入式系统应用,2013(10):72-75.
[15]李伟跃.基于CC2430的无线传感网络中协调器的设计[J].电子设计工程,2011(20):133-135.