齿面接触分析非线性方程组初值问题研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Research on the initial values problem of nonlinear equations based on tooth contact analysis 作者：杨林 ; 张超 ; 明希军 英文作者：YANG Lin;ZHANG Chao;MING Xi-jun;School of Mechanical Engineering,Shenyang University of Technology; 关键词：准双曲面齿轮 ; 齿面接触分析 ; 非线性方程组 ; 初值 英文关键词：hypoid bevel gears;;tooth contact analysis;;nonlinear equations;;initial value 中文刊名：ZXJX 英文刊名：Heavy Machinery 机构：沈阳工业大学机械工程学院; 出版日期：2018-01-20 出版单位：重型机械 年：2018 期：No.341 基金：辽宁省沈阳市工业科技攻关项目(F15-040-2-00) 语种：中文; 页：ZXJX201801009 页数：5 CN：01 ISSN：61-1113/TH 分类号：42-46

摘要

为了解决变性法加工的准双曲面齿轮副(HFM)齿面接触分析(TCA)接触起始点非线性方程组初值难以给定的问题,从接触轨迹点的数学模型出发,提出了一种自动求解TCA接触起始点初值的算法。依据接触起始点非线性方程组自身的特点,找出一个对方程组根有较大影响的等式,将这个等式改写为二元函数,利用此二元函数的性质,建立自动求解TCA接触起始点初值的算法,并编制出相应的电算程序。通过实际算例验证了该算法的有效性。仿真结果表明,对不同参数的HFM齿轮副,该算法能够方便正确的给出TCA接触起始点初值。
        To solve the initial values problem of nonlinear equations about contact starting point of tooth contact analysis(TCA) for hypoid bevel gears manufactured by the modified roll. Based on the mathematical model of contact track points,a method which is able to give the initial values of TCA automatically is presented. The method is based on the relevant computer program and the binary function qualities,a binary function that has a greater effect on root of equations was gotten,and an automatic algorithm for TCA initial contact point was established. The method is proved to be efficient by a numerical example. The simulation results show that the initial values can be correctly and conveniently given under different HFM gear pairs.

引文

[1]曾韬.螺旋锥齿轮设计与加工[M].哈尔滨:哈尔滨工业出版社,1989.
    [2]李敬财.螺旋锥齿轮数字化制造基础应用技术研究[D].天津:天津大学机械工程学院,2008.
    [3]Baxter M L.Basic geometry and tooth contact of hypoid gears[J].Industrial Mathematic,1961,11(02):1-28.
    [4]Krenzer T J.Tooth contact analysis of spiral bevel and hypoid gears under load[N].SAE Tech.Pap.No.810688,1981.
    [5]Litivin F L.A method of local synthesis of gears grounded on the connections between the principal and geodetic curvatures of surfaces[J].ASME Journal of Mechanical Design,1981,103(01):114-125.
    [6]Litivin F L.Local synthesis and tooth contact analysis of face-milled spiral bevel gears[R].New York:NASA,CR4342,1990.
    [7]郑昌启.弧齿锥齿轮和准双曲面齿轮的齿面分析计算原理[J].机械工程学报,1981,17(02):1-12.
    [8]毛世民,吴序堂.任意指定接触基准点的切齿理论[J].西安交通大学学报,1985,19(05):1-10.
    [9]汪中厚,李刚,久保爱三.基于数字化真实齿面的螺旋锥齿轮齿面接触分析[J].机械工程学报,2014,50(15):1-11.
    [10]张宇,严宏志,曾韬.弧齿锥齿轮双重螺旋法切齿原理及齿面接触分析[J].机械工程学报,2015,51(21):15-23.
    [11]吴序堂.格里森制准双曲面齿轮刀倾全展成切齿法的研究[J].机械工程学报,1985,21(02):54-69
    [12]Simon V V.Generation of Hypoid Gear on CNC Hypoid Generator[J].Journal of Mechanical Design,2011,133(12):1-9.
    [13]杨林,明希军.HGM准双曲面齿轮小轮控制参数的确定[J].重型机械,2016,64(04):35-39.
    [14]聂少武,邓效忠,张华,等.奥利康制摆线锥齿轮切齿计算与啮合仿真软件开发[J].机械传动,2016,40(08):144-149.