沉粉工艺COB LED光源发光效率研究
|
摘要
研究了常规荧光粉涂覆工艺和沉粉工艺COB封装白光LED的发光效率、色漂移及光通量等参数的电流依赖关系,对实验结果进行了理论分析。研究结果表明,采用沉粉工艺时,更多的荧光粉集中在LED芯片表面,理论上提供了更好的散热通道,但是LED芯片电光转换时产生的热量和荧光粉光致发光产生的热量均集中在芯片附近,导致芯片附近温度升高,在几种效应的共同作用下,沉粉工艺制作的COB LED的发光效率在不同电流下均低于常规工艺的3%～5%。
Studied is the dependence relationship of current with luminous efficiency,color drift,luminous flux of COB-packaged LED prepared by conventional phosphor coating and depositing process.And the experimental results are analyzed theoretically.The results show that,when depositing process is used,more phosphor will concentrate on the LED chip surface,providing a better heat dissipation channel,but the heat generated both by the electro-optical conversion of LED chip and by the photoluminescence of phosphor is concentrated near the chip surface,resulting in the temperature rise near the chip.Thus under several effects,the luminous efficiency of COB LED fabricated with deposited phosphor is 3%～5%lower than that prepared with conventional process under different current.
Studied is the dependence relationship of current with luminous efficiency,color drift,luminous flux of COB-packaged LED prepared by conventional phosphor coating and depositing process.And the experimental results are analyzed theoretically.The results show that,when depositing process is used,more phosphor will concentrate on the LED chip surface,providing a better heat dissipation channel,but the heat generated both by the electro-optical conversion of LED chip and by the photoluminescence of phosphor is concentrated near the chip surface,resulting in the temperature rise near the chip.Thus under several effects,the luminous efficiency of COB LED fabricated with deposited phosphor is 3%～5%lower than that prepared with conventional process under different current.
引文
[1] Pimputkar S,Speck J S,Denbaars S P,et al.Prospects for LED lighting[J].Nature Photon.,2009(3):180-182.
[2] Zhao F C,Sun N,Zhang H M,et al.Hybrid white organic light-emitting diodes with a double light-emitting layer structure for high color-rendering index[J].J.of Appl.Phys.,2012,112(8):084504.
[3] Hu R,Luo X B,Zheng H,et al.Design of a novel freeform lens for LED uniform illumination and conformal phosphor coating[J].Opt.Express,2012,20(13):13727-13737.
[4]古志良,李炳乾,范广涵,等.COB白光LED的光提取效率研究[J].半导体光电,2015,36(5):753-755.Gu Zhiliang,Li Bingqian,Fan Guanghan,et al.Study on light extraction efficiency of white COB-LED[J].Semiconductor Optoelectronics,2015,36(5):753-755.
[5] Kim J K,Luo H,Schubert E F,et al.Strongly enhanced phosphor efficiency in GaInN white light-emitting diodes using remote phosphor configuration and diffuse reflector cup[J].Jpn.J.Appl.Phys.,2005,44(21):L649-L651.
[6] Kang D Y,Wu E B,Wang D M.Modeling white lightemitting diodes with phosphor layers[J].Appl.Phys.Lett.,2006,89(23):231102-1-3.
[7] Yu R Y,Jin S Z,Cen S Y,et al.Effect of the phosphor geometry on the luminous flux of phosphor-converted lightemitting diodes[J].IEEE Photon.Technol.Lett.,2010,22(23):1765-1767.
[8]王依蔓,郑怀,罗小兵.大功率LED用荧光粉硅胶固化过程中的颗粒沉淀现象模拟[J].中国科技论文,2014,9(8):917-919.Wang Yiman, Zheng Huai, Luo Xiaobing. Modeling on phosphor sedimentation phenomenon during curing process of high power LED packaging[J].China Sciencepaper,2014,9(8):917-919.
[2] Zhao F C,Sun N,Zhang H M,et al.Hybrid white organic light-emitting diodes with a double light-emitting layer structure for high color-rendering index[J].J.of Appl.Phys.,2012,112(8):084504.
[3] Hu R,Luo X B,Zheng H,et al.Design of a novel freeform lens for LED uniform illumination and conformal phosphor coating[J].Opt.Express,2012,20(13):13727-13737.
[4]古志良,李炳乾,范广涵,等.COB白光LED的光提取效率研究[J].半导体光电,2015,36(5):753-755.Gu Zhiliang,Li Bingqian,Fan Guanghan,et al.Study on light extraction efficiency of white COB-LED[J].Semiconductor Optoelectronics,2015,36(5):753-755.
[5] Kim J K,Luo H,Schubert E F,et al.Strongly enhanced phosphor efficiency in GaInN white light-emitting diodes using remote phosphor configuration and diffuse reflector cup[J].Jpn.J.Appl.Phys.,2005,44(21):L649-L651.
[6] Kang D Y,Wu E B,Wang D M.Modeling white lightemitting diodes with phosphor layers[J].Appl.Phys.Lett.,2006,89(23):231102-1-3.
[7] Yu R Y,Jin S Z,Cen S Y,et al.Effect of the phosphor geometry on the luminous flux of phosphor-converted lightemitting diodes[J].IEEE Photon.Technol.Lett.,2010,22(23):1765-1767.
[8]王依蔓,郑怀,罗小兵.大功率LED用荧光粉硅胶固化过程中的颗粒沉淀现象模拟[J].中国科技论文,2014,9(8):917-919.Wang Yiman, Zheng Huai, Luo Xiaobing. Modeling on phosphor sedimentation phenomenon during curing process of high power LED packaging[J].China Sciencepaper,2014,9(8):917-919.