Joint application of geophysical methods and Direct Push-soil gas surveys for the improved delineation of buried fault zones

详细信息	查看全文 | 推荐本文 |

• 作者：Claudia Sch&uuml ; tze^a ; ^{claudia.schuetze@ufz.de} ; Thomas Vienken^a ; ¹ ; ^{thomas.vienken@ufz.de} ; Ulrike Werban^a ; ² ; ^{ulrike.werban@ufz.de} ; Peter Dietrich^a ; ³ ; ^{peter.dietrich@ufz.de} ; Anthony Finizola^b ; ⁴ ; ^{anthony.finizola@univ-reunion.fr} ; Carsten Leven^c ; ⁵ ; ^{carsten.leven-pfister@uni-tuebingen.de}
• 关键词：Fault delineation ; Direct Push ; Seismic refraction ; Electrical resistivity tomography ; Carbon dioxide ; Radon
• 刊名：Journal of Applied Geophysics
• 出版年：2012
• 期刊代码：39_09269851
• 类别：ear
• 出版时间：July, 2012
• 卷：82
• 期：Complete
• 页码：129-136
• 文件大小：1948 K

摘要

This study provides an example of fault structure delineation using both geophysical measurements and soil-gas surveys. Seismic refraction and electrical resistivity tomography investigations were performed in combination with Direct Push (DP) soil gas concentration measurements, with the main objective being the characterization of an assumed permeable fault structure which is covered by sediments that are over 20 m thick. Geophysical methods were used to locate a potential fault zone and to provide an insight into the structural features of the covering sediments. Methods for quantifying the soil-gas concentration were applied to evaluate the permeability of the fault zone. The positioning of gas sampling points was based on results of a geophysical survey undertaken beforehand. Gas sampling was performed using DP-technology to obtain concentration profiles for the inert gas Radon-222 and its carrier gas CO₂ along the profile at different depths. Joint interpretation of the spatial distribution of geogenic gases and results from the geophysical survey allowed us to produce a representative model image of the fault structure consisting of two fault branches. Based on this image, it was possible to interpret the observed gas concentration patterns.