Fabrication of free-standing copper foils covered with highly-ordered copper nanowire arrays
- 作者：Leszek Zaraska ; zaraska@chemia.uj.edu.pl ; Grzegorz D. Sulka ; Marian Jasku艂a
- 关键词：Anodization ; Porous alumina ; Nanowires ; Electrodeposition
- 刊名：Applied Surface Science
- 出版年：2012
- 期刊代码：6_01694332
- 类别：ms
- 出版时间：15 July, 2012
- 卷：258
- 期：19
- 页码：7781-7786
- 文件大小：1143 K
摘要
The through-hole nanoporous anodic aluminum oxide (AAO) membranes with relatively large surface area (ca. 2 cm2) were employed for fabrication of free-standing and mechanically stable copper foils covered with close-packed and highly-ordered copper nanowire arrays. The home-made AAO membranes with different pore diameters and interpore distances were fabricated via a two-step self-organized anodization of aluminum performed in sulfuric acid, oxalic acid and phosphoric acid followed by the pore opening/widening procedure. The direct current (DC) electrodeposition of copper was performed efficiently on both sides of AAO templates. The bottom side of the AAO templates was not insulated and consequently Cu nanowire arrays on thick Cu layers were obtained. The proposed template-assisted fabrication of free-standing copper nanowire array electrodes is a promising method for synthesis of nanostructured current collectors. The composition of Cu nanowires was confirmed by energy dispersive X-Ray spectroscopy (EDS) and X-ray diffraction (XRD) analyses. The structural features of nanowires were evaluated from field emission scanning electron microscopy (FE-SEM) images and compared with the characteristic parameters of anodic alumina membranes.