Hydrothermal Synthesis, Structure Investigation, and Oxide Ion Conductivity of Mixed Si/Ge-Based Apatite-Type Phases

详细信息    查看全文

• 作者：Henan Li ; Tom Baikie ; Stevin S. Pramana ; J. Felix Shin ; Philip J. Keenan ; Peter R. Slater ; Frank Brink ; James Hester ; Tao An ; Tim J. White
• 刊名：Inorganic Chemistry
• 出版年：2014
• 出版时间：May 19, 2014
• 年：2014
• 卷：53
• 期：10
• 页码：4803-4812
• 全文大小：543K
• 年卷期：v.53,no.10(May 19, 2014)
• ISSN：1520-510X

文摘

Apatite-type oxides ([A^I₄][A^II₆][(BO₄)₆]O₂), particularly those of the rare-earth silicate and germanate systems, are among the more promising materials being considered as alternative solid oxide fuel cell electrolytes. Nonstoichiometric lanthanum silicate and germanate apatites display pure ionic conductivities exceeding those of yttria-stabilized zirconia at moderate temperatures (500鈥?00 掳C). In this study, mixed Si/Ge-based apatites were prepared by hydrothermal synthesis under mild conditions rather than the conventional solid-state method at high temperatures. Single-phase and highly crystalline nanosized apatite powders were obtained with the morphology changing across the series from spheres for the Si-based end member to hexagonal rods for the Ge-based end member. Powder X-ray and neutron analysis found all of these apatites to be hexagonal (P6₃/m). Quantitative X-ray microanalysis established the partial (<15 at%) substitution of La³⁺ by Na⁺ (introduced from the NaOH hydrothermal reagent), which showed a slight preference to enter the A^I 4f framework position over the A^II 6h tunnel site. Moreover, retention of hydroxide (OH^{鈥?/sup>) was confirmed by IR spectroscopy and thermogravimetric analysis, and these apatites are best described as oxyhydroxyapatites. To prepare dense pellets for conductivity measurements, both conventional heat treatment and spark plasma sintering methods were compared, with the peculiar features of hydrothermally synthesized apatites and the influence of sodium on the ionic conductivity considered.}