High-Temperature Carbon Deposition on Oxide Surfaces by CO Disproportionation

详细信息    查看全文

• 作者：Michaela Kogler ; Eva-Maria K?ck ; Bernhard Kl?tzer ; Thomas Schachinger ; Wolfgang Wallisch ; Raphael Henn ; Christian W. Huck ; Clivia Hejny ; Simon Penner
• 刊名：Journal of Physical Chemistry C
• 出版年：2016
• 出版时间：January 28, 2016
• 年：2016
• 卷：120
• 期：3
• 页码：1795-1807
• 全文大小：783K
• ISSN：1932-7455

文摘

Carbon deposition due to the inverse Boudouard reaction (2CO → CO₂ + C) has been studied on yttria-stabilized zirconia (YSZ), Y₂O₃, and ZrO₂ in comparison to CH₄ by a variety of different chemical, structural, and spectroscopic characterization techniques, including electrochemical impedance spectroscopy (EIS), Fourier-transform infrared (FT-IR) spectroscopy and imaging, Raman spectroscopy, and electron microscopy. Consentaneously, all experimental methods prove the formation of a more or less conducting carbon layer (depending on the used oxide) of disordered nanocrystalline graphite covering the individual grains of the respective pure oxides after treatment in flowing CO at temperatures above ～1023 K. All measurements show that during carbon deposition, a more or less substantial surface reduction of the oxides takes place. These results, therefore, reveal that the studied pure oxides can act as efficient nonmetallic substrates for CO-induced growth of highly distorted graphitic carbon with possible important technological implications especially with respect to treatment in pure CO or CO-rich syngas mixtures. Compared to CH₄, more carbon is generally deposited in CO under otherwise similar experimental conditions. Although Raman and electron microscopy measurements do not show substantial differences in the structure of the deposited carbon layers, in particular, electrochemical impedance measurements reveal major differences in the dynamic growth process of the carbon layer, eventually leading to less percolated islands and suppressed metallic conductivity in comparison to CH₄-induced graphite.