Dry sliding wear response of A413 alloy: Influence of intermetallics and test parameters

详细信息    查看全文

• 作者：H.R. Manohara^a ; T.M. Chandrashekharaiah^b ; K. Venkateswarlu^c ; ^{karodi2002@yahoo.co.in} ; S.A. Kori^d ; ¹
• 关键词：Intermetallics ; Temperature ; A413 alloy ; Sliding wear
• 刊名：Tribology International
• 出版年：2012
• 出版时间：July, 2012
• 年：2012
• 卷：51
• 期：Complete
• 页码：54-60
• 全文大小：1189 K

文摘

Intermetallic particles of Al₃Ti, TiB₂, AlB₂ and Al₄Sr were added to A413 alloy, and sliding wear tests were carried out under dry sliding conditions at room temperature as well as at high temperatures of 60, 120, and 180 ¡ãC. The results demonstrate that contacting surfaces at high temperature conditions are susceptible to oxidation and the wear rate of reinforced alloys is reduced. This is due to the formation of glazing layer that offers protection. Moreover, intermetallic particles played an important role as grain modifier/refiner and were responsible for reduced wear and friction.